Selection of the rational scheme of the automated control of the electric drive of the mine hoist by the G-M system
Authors:
Abstract
In a mine hoisting machine, the controlled object is the drive motor. The autoregulation system should provide a certain program speed of the machine per lifting cycle with proper transients in the electric drive. According to the structure, the control system of the hoisting electric drive is a scheme with feedback on the motor speed (Fig. 1). Regulator B-P in this scheme performs the functions of an adder of influences: setting the program of speed change and regulating influence, transmitted by negative feedback from the output to the input of the system.
Область исследования:
(Archived) Without section
Funding:
None
References
- Chichivanov R. P. Investigation of the electro‑machine control system of the automated electric drive G‑M for a mine hoisting machine. Cand. dissertation, Fondy LGI, 1954. (in Russian)
- Chichivanov R. P. On the equation of dynamics of the process of regulation in closed electromechanical systems. Zapiski Gornogo Instituta, 1957, vol. XXXV, iss. 1. (in Russian)
- Chichivanov R. P. On the gain coefficient, accuracy of regulation and statism of closed electromechanical systems. Zapiski Gornogo Instituta, 1957, vol. XXXV, iss. 1. (in Russian)
Similar articles
Critical remarks on the article by N. N. Smirnov “Theoretical substantiation of design and calculation of cage cam parachutes”
1959 B. N. Lyubimov
Influence of parameters of the single-circuit control system on dynamic properties of the G-M drive
1959 R. P. Chichivanov