Investigations of contouring borehole charge designs for vertical shaft sinking
Authors:
Abstract
The practice of construction of vertical shafts by the drilling and blasting method in the conditions of the combine “Rostovshahtostroy” shows that the improvement of parameters of drilling and blasting works allows a reduction of the deviation of actual cross‑sections from the design. At the same time this is not accompanied by a reduction of irregularities of the rock walls of the shaft, and the destruction of rocks in exposures remains still significant.
Область исследования:
(Archived) Without section
Funding:
None
References
- Borovikov V. A. Research of influence of charge explosion conditions on the process of destruction and ways to increase the use of explosive energy. Author's abstract of cand. dissertation. LMI LGI, 1965.
- Melnikov I. V. V., Marchenko L. I. Explosion Energy and Charge Design. Nedra, 1964.
- Khanukaev A. N. About the influence of radial gaps and air spaces on the parameters of the stress wave and the fracture process. In the collection: Blasting V sb. "Vzryvnoe delo", No. 54 11, Nedra, 1964.
Similar articles
Determination of stresses in the massif near a fixed excavation with account of contour irregularities and creep of rocks
1969 A. G. Protosenya, V. A. Vashchilin
Calculation of cleaning chamber dimensions from the condition of stability limit of a layered roof fixed by a rod anchorage
1969 M. P. Markovich
Simplified method of measuring the loads on the vertical shaft support and displacements of the surrounding rock mass
1969 G. G. Mirzaev, V. D. Yagodkin, N. V. Semevskaya, Yu. S. Obruchev, V. L. Fedulin
Economic efficiency of contour blasting during sinking of vertical shafts
1969 V. D. Fisunov, V. I. Smorodinov, N. N. Golovko