Submit an Article
Become a reviewer
Olga S. Zubkova
Olga S. Zubkova
Researcher, Ph.D.
Saint Petersburg Mining University
Researcher, Ph.D.
Saint Petersburg Mining University

Articles

Geotechnical Engineering and Engineering Geology
  • Date submitted
    2022-10-19
  • Date accepted
    2023-02-14
  • Date published
    2023-04-25

Electric steelmaking dust as a raw material for coagulant production

Article preview

The paper describes the issues associated with waste generated during steel production and processing, in particular the dust from electric arc furnaces (EAF). An effective solution for the disposal of such waste is its involvement in processing to obtain valuable products. This paper studies the physical and chemical properties of EAF dust produced during the smelting of metallized pellets and captured by the dust and gas cleaning system of the steel-smelting shop at the Oskol Electrometallurgical Combine, Belgorod Region. The results obtained in the study of the chemical and disperse compositions of dust, the microstructure of the surface made it possible to propose the use of dust as a raw material for coagulant production. The conditions of acid-thermal treatment of dust are determined, contributing to the partial dissolution of iron (II), (III), and aluminium compounds, which ensure the coagulation processes during wastewater treatment. Model solutions show high efficiency (> 95 %) of water treatment from heavy metal ions by modified EAF dust.

How to cite: Sverguzova S.V., Sapronova Z.A., Zubkova O.S., Svyatchenko A.V., Shaikhieva K.I., Voronina Y.S. Electric steelmaking dust as a raw material for coagulant production // Journal of Mining Institute. 2023. Vol. 260. p. 279-288. DOI: 10.31897/PMI.2023.23
Geotechnical Engineering and Engineering Geology
  • Date submitted
    2022-03-22
  • Date accepted
    2022-11-17
  • Date published
    2023-02-27

Development of composition and study of sorbent properties based on saponite

Article preview

The development of a comprehensive approach to preventing the pollution of natural objects is necessary due to the high requirements of environmental legislation for the discharge of industrial wastewater. Adsorbents are used in various industries to extract heavy metals from wastewater. In this study the possibility of using saponite clay as a raw material for the production of sorbent for the extraction of copper ions Cu 2+ from industrial wastewater is considered, a recipe and technology of sorbent production are developed, and its chemical composition is established. It has been established that the optimum temperature for heat treatment of the sorbent and corresponds to 550 ºC, since at this temperature saponite extrudates acquire strength (strength 34.1 kg/mm 2 ) and textural properties (specific surface area of pellets 22.803 m 2 /g), allowing them to be used as sorbents. The kinetics of molecular adsorption was studied using model solutions of copper (II) sulfate. The extraction efficiency of copper (II) ions from the model solutions is 93 %. Extraction efficiency of copper (II) ions from copper plating wastewater reaches 94 %. SEM results confirm the presence of metal on the sorbent surface.

How to cite: Zubkova O.S., Pyagay I.N., Pankratieva K.A., Toropchina M.A. Development of composition and study of sorbent properties based on saponite // Journal of Mining Institute. 2023. Vol. 259. p. 21-29. DOI: 10.31897/PMI.2023.1