-
Date submitted2019-06-30
-
Date accepted2019-09-10
-
Date published2019-12-24
Industrial safety principles in coal mining
- Authors:
- E. N. Chemezov
The article provides a description of injuries in coal mining enterprises in Russia. The high injury rate causes the need of developing new effective ways and means of improving safety at mining enterprises. Recently in Russia there has been a tendency for a slight decrease in fatal injuries, which indicates some progress in prevention of industrial accidents. At the same time, the problem of improving the working conditions of coal miners, reducing the level of injuries and occupational diseases in this industry remains a very urgent task. Ensuring safe operation and industrial health and safety is not only reasonable economic policy but one of the constitutional human rights. At Russian coal mining enterprises, they take measures to reduce injuries, the supervisory authorities and employees of the enterprises carry out certain work to comply with safety requirements. However, significant success has not yet been achieved. Despite the fatal injuries and accidents, the issue of industrial mining safety is not becoming a top priority. Occupational safety measures are often financed on a «left-over» principle, and therefore remain not implemented. Many managers do not pay enough attention to safety issues and have little control over the planned activities in this area. The article analyzes the causes of injuries and proposes the key directions for creating normal working conditions in coal mining enterprises.
-
Date submitted2016-09-06
-
Date accepted2016-11-13
-
Date published2017-02-22
Justified selection of a seam degassing technology to ensure safety of intensive coal mining
- Authors:
- S. V. Slastunov
- E. P. Yutyaev
The paper contains main aspects of methodological approach to objective analytic assessment of maximum permissible output of the mine faces from the viewpoint of gas factor. Analytic forecast is centered around the assessment of methane inflow into the face area from all possible sources, based on fundamental physical laws, modern tools of mathematical modeling and in-situ tests of main properties and state parameters of the gas-bearing coal formation. Objective and reliable estimation of permissible outputs is a starting point for justified selection of a seam degassing technology, that has to be based on time factor and predicted value of gas recovery from a coal seam to a degassing well. Recommendations have been formulated on the selection of degassing technology for the coal seam «Boldyrevsky» of the Kirov mine, based on the use of cutting-edge technological schemes (hydraulic fracture, carried out from development workings, etc.), successfully implemented on the mentioned site.
-
Date submitted2015-08-17
-
Date accepted2015-10-12
-
Date published2016-04-22
Isolation of promising areas to drill for unconventional hydrocarbons petrikovskih sediments Davydovskogo deposit Pripyat Trough
- Authors:
- E.I. Shevelev
Pripyat Trough is the only oil basin in the territory of the Republic of Belarus. Mining is carried out within the basin for 50 years. During this time, the proportion of active stocks decreased significantly, while the share of hard-to-inventories increased. Therefore, due to the depletion of traditional reserves, urgent problem arises in the study and production of unconventional hydrocarbon traps. To this type of traps are Petrikov deposits Davydov field. These deposits have low permeability and capacitive properties, but at the same time in a number of wells in the test sediment in Colon yielded commercial oil inflows. Some of the well in a certain period of development led oil from Petrikov deposits. In similar deposits Rechitsa field yielded commercial oil inflows in drilling horizontal wells with hydraulic fracturing. Until recently, the reservoir Petrikov deposits was listed among the off-balance sheet reserves after drilling – reserves transferred to the balance of C1. Therefore, the input to the development of stranded there is a need to identify the most promising area for drilling horizontal wells, followed by hydraulic fracturing. To perform this work was carried out pointwise interpretation of GIS for all wells Davydov field, the results of which built the geological and petrophysical model of the deposit. Also, the analysis of core samples, the results of drilling. Produced dismemberment Petrikov deposits on two subhorizon on the results of the interpretation of GIS and well logs. The outcome of the work performed is a recommended site for drilling.
-
Date submitted2014-11-01
-
Date accepted2015-01-18
-
Date published2015-10-26
On the design features of underground multiple gassy coal seam mining
- Authors:
- O. I. Kazanin
The analysis of the industry regulatory requirements and the world design experience of underground multiple coal seam mining is provided. The main problems of intensive longwall mining of multiple flat gassy coal seams as well as methods for determination of high rock pressure zone parameters and seams interaction are considered. The examples of a number of mines in the Kuzbass and Pechora coal basins show that the design of multiple seam mining and the choice of longwall panel parameters were often made without taking into consideration influence of surrounded seams that leads to essential complication of conditions for mining operations and decreases the technical and economic indicators of mining. The existing industry regulations do not allow considering complex influence of factors in multiple coal seams mining fully. On the basis of field, laboratory, and numeric research results it is noted that recommendations for pillar positioning in contiguous seams ensuring efficiency and safety of multiple seam longwall mining can significantly differ in case of liability of coal seams to spontaneous combustion, high natural gas content, influence of multiple seam mining onto daily surface, and difficult conditions of entries maintenance. The importance of having information on the stress-strain condition of the rock mass at a design stage and its changes in the process of multiple seam mining is shown. The need for industry regulations updating for the purpose of a more detailed definition of a form, size and a location of high rock pressure zones as well as stress parameters in these zones is noted. A set of recommendations for effective and safe multiple seam mining is developed.
-
Date submitted2009-10-21
-
Date accepted2009-12-16
-
Date published2010-09-22
Geomechanical foundations of the safe extraction in joint mining of rich, coppery and ore patches in deep ore mines at Тalnakh
- Authors:
- V. A. Zvezdkin
- A. A. Andreev
The paper deals with the specific formation of stress fields in ore-bearing intrusions at the Oktiabrsky and Talnakh ore deposits with due account of depth of occurrence and formation of tectonic disturbances. The authors have investigated the influence of mining works on stress state of ore-bearing portion of the intrusion. The relationships were obtained in terms of the formation of stress fields in the intrusion during its undermining, overmining and joint mining of several ore deposits. Some recommendations are given for mining of series of ore formations at the Oktiabrsky and Talnakh deposits.