-
Date submitted2021-10-14
-
Date accepted2022-01-24
-
Date published2022-04-29
Monitoring of compressed air losses in branched air flow networks of mining enterprises
Compressed air as a type of safe technological energy carrier is widely used in many industries. In economically developed countries energy costs for the production and distribution of compressed air reach 10 % of the total energy costs. The analysis of compressed air production and distribution systems in the industrial sector shows that the efficiency of the systems is at a relatively low level. This is due to the fact that insufficient attention is paid to these systems since the compressed air systems energy monitoring has certain difficulties – the presence of complex and branched air pipeline networks with unique characteristics; low sensitivity of the equipment which consumes compressed air; the complexity of auditing pneumatic equipment that is in constant operation. The article analyzes the options for reducing the cost of production and compressed air distribution. One of the promising ways to reduce the compressed air distribution cost is timely detection and elimination of leaks that occur in the external air supply network of the enterprise. The task is solved by hardware-software monitoring of compressed air pressure at key points in the network. The proposed method allows real-time detecting of emerging air leaks in the air duct network and sending commands to maintenance personnel for their timely localization. This technique was tested in the industrial conditions of ALROSA enterprises on the air pipeline network of the Mir mine of the Mirninsky Mining and Processing Plant and showed satisfactory convergence of the calculated leakage values with the actual ones. The practical significance of the obtained results is that the developed method for monitoring air leaks in the air duct network is simple, it requires an uncomplicated software implementation and allows to localize leaks in a timely manner, thereby reducing unproductive energy costs at the enterprises.
-
Date submitted2021-04-26
-
Date accepted2021-07-27
-
Date published2021-10-21
Study of the dynamics for gas accumulation in the annulus of production wells
Accumulation of associated petroleum gas in the annulus is one of the negative factors that impede the intensification of mechanized oil production. An increase in annular gas pressure causes growth of bottomhole pressure, a decrease in back pressure to the formation and the inflow of formation fluid. In addition, accumulation of gas in the annulus leads to displacement and a decrease in the liquid level above the submersible pump. Insufficient level of the pump submersion (rod or electric submersible) causes a number of complications in the operation of mechanized production units associated with overheating of the elements in pumping units. Therefore, the development of technologies for optimizing the gas pressure in the annulus is relevant. Method for calculating the intensity of gas pressure increase in the annulus of production wells operated by submersible pumps has been developed. Analytical dependence for calculating the time interval of gas accumulation in the annulus, during which the dynamic level decreases to the pump intake, is obtained. This value can be used to estimate the frequency of gas withdrawal from the annulus using compressors. It has been found that the rate of increase in annular gas pressure in time increases non-linearly with a rise in the gas-oil ratio and a decrease in water cut, and also linearly increases with a rise in liquid flow rate. Influence of the operating (gas-oil ratio) and technological (value of the gas pressure maintained in the annulus) factors on the flow rate of the suspended reciprocating compressor driven by the beam engine, designed for forced withdrawal and redirection of the annular gas into the flow line of the well is analyzed.
-
Date submitted2019-06-30
-
Date accepted2019-09-07
-
Date published2019-12-24
Development of Scada-model for trunk gas pipeline's compressor station
- Authors:
- Yu. V. Ilyushin
- O. V. Afanaseva
Nowadays, at all levels of created automated control systems for technological processes, programmable technical means are used that require specific software within framework of necessary functional tasks. This software should include a set of software tools that communicate with technical devices and organize «human-machine interface» (HMI) in the form of application software for AWPs with assigned communication tasks for persons, responsible for management decision-making: operators, dispatchers, managers. However, hardware architecture is unique for each particular case, so it is necessary to refine or create a new control system. This is a rather laborious process. To simplify creation of such systems SCADA-systems are used. Article is devoted to development of SCADA-component for trunk gas pipeline's compressor workshop. Developed component allows tracking the characteristics of gas transportation process selected by operator. Development is based on «Windows» operating system and integrated environment TRACE MODE (SCADA/HMI).
-
Date submitted2018-11-13
-
Date accepted2019-01-23
-
Date published2019-04-23
Application of automation systems for monitoring and energy efficiency accounting indicators of mining enterprises compressor facility operation
- Authors:
- A. V. Ugolnikov
- N. V. Makarov
The balance of electricity consumption a significant part is occupied by the production of compressed air at the mining enterprises. Many compressor stations of enterprises are equipped with automated parameter management systems that allow reliable, uninterrupted and safe operation of the compressor facilities. But the majority of automation systems at compressor stations do not perform the function of monitoring the energy efficiency indicators of the operation of a compressor station. The article discusses the issue of including compressed air flow sensors (flow meters) in an automated control system of a compressor station, which allows you to control the production of compressed air and the consumption of electrical energy for its production. Monitoring and recording of these parameters makes it possible, using microprocessor technology, to control one of the main indicators of energy efficiency – the specific energy consumption for producing one cubic meter of compressed air, determine how efficiently the compressor station works, and take appropriate measures to reduce specific energy consumption in time. . The use of additional functions of automated control and monitoring systems will allow the development and application of energy-saving measures aimed at improving the energy efficiency of the enterprise, which will lead to a reduction in the cost of finished products and increase their competitiveness
-
Date submitted2018-09-08
-
Date accepted2018-10-27
-
Date published2019-02-22
Special strategy of treatment of difficulty-profile conical screw surfaces of single-screw compressors working bodies
- Authors:
- A. S. Vasilev
- A. A. Goncharov
The article deals with the problems arising during the shaping of complex profile tapered helical surfaces. These surfaces form the geometry of the working bodies of single-screw miniature compressors, which have great prospects for use in mobile miniature compressor plants, which is especially important for medical and space technology, robotics, oil and gas and mining industries. Due to the fact that the capabilities of existing CAD systems do not allow obtaining three-dimensional models of these surfaces, the problem of preparing a control program for a CNC machine arises, since the calculation of the tool path in CAM systems when processing complex surfaces is impossible without a three-dimensional surface model. To solve the problem, an automated programming system was developed that implements a formalized toolpath calculation in accordance with the proposed special processing strategy for conical helical surfaces. As the initial data for calculating the toolpath, the system needs information about the tool geometry and the helical surface in a parametric form, which makes it possible to abandon the construction of a three-dimensional surface model. The results of processing prototypes for the proposed strategy are given.
-
Date submitted2015-12-01
-
Date accepted2016-02-29
-
Date published2016-12-23
Simulation of diesel engine energy conversion processes
- Authors:
- A. S. Afanasev
- A. A. Tretyakov
In order to keep diesel engines in good working order the troubleshooting methods shall be improved. For their further improvement by parameters of associated processes a need has arisen to develop a diesel engine troubleshooting method based on time parameters of operating cycle. For such method to be developed a computational experiment involving simulation of diesel engine energy conversion processes has been carried out. The simulation was based on the basic mathematical model of reciprocating internal combustion engines, representing a closed system of equations and relationships. The said model has been supplemented with the engine torque dynamics taking into account the current values of in-cylinder processes with different amounts of fuel injected, including zero feed. The torque values obtained by the in-cylinder pressure conversion does not account for mechanical losses, which is why the base simulation program has been supplemented with calculations for the friction and pumping forces. In order to determine the indicator diagram of idle cylinder a transition to zero fuel feed mode and exclusion of the combustion process from calculation have been provisioned.
-
Date submitted2010-07-12
-
Date accepted2010-09-14
-
Date published2011-03-21
Principles of an automatic control system of ventilation creation the kuznetsovsky railway tunnel
- Authors:
- S. G. Gendler
- V. A. Pleskunov
For effective ventilation Kuznetsovsky railway tunnel the longitudinal scheme of ventilation based on use of jet fans is offered. It is shown that use of the offered scheme of ventilation at influence of natural draft and piston effect of trains is impossible without an automatic control system of ventilation (ACSV). The principles of work ACSV taking into consideration natural and operational factors are proved.
-
Date submitted2010-07-10
-
Date accepted2010-09-04
-
Date published2011-03-21
Experimental research of the train aerodynamic resistance
- Authors:
- V. A. Pleskunov
In paper the technique of definition of aerodynamic resistance of the train, a being main component of a piston pressure is resulted. The urgency of the given theme is caused by essential influence of a piston pressure on distribution of fresh air on a tunnel and accordingly on safe operation of railway tunnels.
-
Date submitted2008-11-02
-
Date accepted2009-01-05
-
Date published2009-12-11
Assessment the effectiveness of energy consumption in the enterprises of the main transport of gas
- Authors:
- T. F. Konoplev
This study proposed a new comprehensive approach to assessing energy efficiency in the enterprises of the main transport of gas, which allows you to explore in detail the consumption of energy resources of each equipment, consumption of resources in technological operations and the creation of favorable conditions, to assess the state of accounting systems and the organization works to improve the efficiency use of energy.
-
Date submitted1953-07-17
-
Date accepted1953-09-03
-
Date published1954-12-04
Академик Александр Петрович Герман
- Authors:
- Unknown
Советская горная наука и Ленинградский горный институт понесли тяжелую утрату — 30 ноября 1953 г. после тяжелой и продолжительной болезни скончался один из основоположников современной отечественной школы горных механиков, академик, доктор технических наук, заместитель директора по научной работе и заведующий кафедрой горной механики Ленинградского горного института Александр Петрович Герман. Научными работами А. П. Германа были охвачены почти все разделы горной механики. Ко всем сложным теоретическим вопросам он проявлял наибольший интерес и, являясь блестящим аналитиком и великолепным математиком, обычно талантливо и успешно разрешал трудные и неясные вопросы горной механики. Рассматривая многочисленные труды А. П. Германа, можно сделать вывод, что излюбленной областью его исследований была техническая термодинамика или, точнее, приложение термодинамики к разрешению технических вопросов. Большой интерес и практическое значение представляют работы А.П. Германа, посвященные теории эффективного процесса поршневых компрессоров.