-
Date submitted2024-04-25
-
Date accepted2024-06-13
-
Date published2024-07-11
Evaluation of the effectiveness of neutralization and purification of acidic waters from metals with ash when using alternative fuels from municipal waste
- Authors:
- Polina A. Kharko
- Aleksandr S. Danilov
The problem of pollution of natural water objects with heavy metals is extremely relevant for the areas where industrial enterprises are located. Unauthorized discharge of contaminated wastewater, inefficient operation of sewage treatment plants, as well as leakage of drainage waters from man-made massifs lead to changes in the hydrological system affecting living objects. The article studies the composition of ash from the combustion of alternative fuels from municipal waste, and also considers the possibility of using it to neutralize sulfuric acid drainage waters and extract metal ions (Cu, Cd, Fe, Mn, Zn) from them. It has been established that the efficiency of water purification from metals depends on the pH value achieved during the purification process. The pH value is regulated by the dose of the introduced ash, the contact time and depends on the initial concentration of metal ions and sulfates in the solution. Studies on the neutralization and purification of a model solution of sulfuric acid drainage waters of a tailings farm of known composition have shown that in order to achieve a pH of 8-9, optimal for precipitation of metal hydroxides Cu, Cd, Fe, Mn, Zn and Al washed out of ash, and water purification with an efficiency of 96.60 to 99.99 %, it is necessary to add 15 g/l of ash and stir the suspension continuously for 35 minutes. It was revealed that exposure to ash with sulfuric acid waters leads to the transition of water-soluble forms of metals into insoluble ones and their “cementation” with calcium sulfate. The amount of Zn and Fe ions washed out of the ash decreases by 82 and 77 %, Al, Cd, Cu, Mn – by 25 %. This reduces the toxicity of ash, which is proved by a decrease in the toxic multiplicity of dilution of the water extract by 14 times.
-
Date submitted2022-10-31
-
Date accepted2023-03-02
-
Date published2023-12-25
Lightweight ash-based concrete production as a promising way of technogenic product utilization (on the example of sewage treatment waste)
- Authors:
- Tatyana E. Litvinova
- Denis V. Suchkov
The study is devoted to the development of a method for the technogenic raw materials utilization. Special attention is paid to the prospect of involving products based on them in the production of new building materials. The results of Russian and foreign studies on the reuse of wastes, such as phosphogypsum, metallurgical slag, waste from municipal and industrial wastewater treatment, etc., in the building materials industry are considered. It has been established that the use of incinerated sewage sludge ash in construction is a promising direction in terms of environmental and economic efficiency. The research confirmed the compliance of the lightweight ash-based concrete components to the regulatory documentation requirements for a number of indicators. As a result of the research, the composition of the raw mixture for the lightweight concrete production with incinerated sewage sludge ash as a replacement for a part of the cement has been developed. In terms of parameters, the developed concrete corresponds to standard lightweight concrete, marked in accordance with the regulatory documents of the Russian Federation as D1300 (density not less than 1.3 g/cm3), Btb2 (flexural strength not less than 2 MPa), M200/B15 (compressive strength not less than 15 MPa). Lightweight ash-based concrete is suitable for use in construction, repair of roads and improvement of urban areas.
-
Date submitted2015-10-06
-
Date accepted2015-12-18
-
Date published2016-08-22
New technology of dry benefication of fly ash from coal power plants using applied mineralogy techniques
- Authors:
- V. A. Arsentev
- E. L. Kotova
The existence of environmental and strategic need to process dumps and slagheaps of coal mining enterprises of Russia and foreign countries results in reviewing the potential of using fly ash as a technogenic mineral resource. Comprehensive studies of substance composition of fly ash from coal power plants make it possible to define rational further ways of utilizing that mineral resource substantiating the scheme of its technological secondary processing. In view of the numerous environmental problems stemming from the techniques of wet benefication and processing of that mineral resource, a technology is suggested of dry cleaning of fly ash from thermal coal power plants. Studies were carried out using a number of samples of fly ash from various power plants. The suggested criteria are used to discriminate the compounds of fly ash and quantitative and qualitative composition of particulate matter is assessed. Studies of substance composition of fly ash samples has demonstrated that the concentration of non-combusted carbon in them varies from 5 to 20 %. The principal technological procedure of cleansing in our studies was a combination of magnetic and electric separation of ash in the state of vibrational pseudo-liquefaction. It enables one to increase the throughput capacity and selectivity of the cleansing process significantly. In the result of such cleansing a stable mineral fraction is produced that contains 0.5-2.5 % of carbon, so that the purified mineral fraction can be used as a construction binding agent.
-
Date submitted2015-10-07
-
Date accepted2015-12-27
-
Date published2016-08-22
Phase transformations in synthesis technologies and sorption properties of zeolites from coal fly ash
- Authors:
- O. B. Kotova
- I. L. Shabalin
- E. L. Kotova
Coal fly ash is generated in the course of combustion of coal at thermal power plants. Environmental problems increase sharply without disposing that industrial waste. Technologies were tested of hydrothermal synthesis of zeolites from fly ash forming during combustion of coal at thermal power plants of the Pechora coal basin and dependences were identified of the experiment conditions on physical and chemical properties of the end product. It is demonstrated that synthesizing zeolites from fly ash is the first stage of forming ceramic materials (ceramic membranes), which defines the fundamental character (importance) of that area of studies. It was for the first time that sorption and structural characteristics and cation-exchange properties of fly ash from the Pechora basin coals were studied with respect to, Ba 2+ and Sr 2+ .