Issues of fracture research in drilling explosive boreholes
About authors
- 1 — Mining Institute UrD RAS
- 2 — Mining Institute UrD RAS
- 3 — Mining Institute UrD RAS
Abstract
According to the principles of rock destruction, mechanical drilling of wells can be carried out in several ways, differing in their physical nature. For medium- and high-strength rock, roller cone bits with milled cutting structure or reinforced with high-strength tungsten carbide pins are used. The roller cone method of drilling implements the principle of bottom-hole destruction due to static impingement of the cutting structure, the rock is destroyed mainly by a piercing, partially blocked chipping. From the energy point of view, such impact on the bottom hole is not optimal.
Область исследования:
(Archived) Without section
Funding:
None
Similar articles
Model of the granulometric composition of the fractured mined rock at the edge
2001 M. G. Menzhulin, G. P. Paramonov, S. V. Khokhlov
Directions for the development of comprehensive mechanization of blasting operations in the mines of Mountain Shoriya and Khakassia
2001 I. V. Mashukov, A. N. Topkaev, G. V. Goltsov, V. N. Nikitin, Yu. M. Karapetyan, V. K. Dzhalov, P. A. Filippov
Development of technical means to improve the safety of blasting operations in mines, hazardous in gas and dust
2001 Yu. V. Gorlov