Development of sealing and lubrication systems for bearings of high-speed roller bits
Authors:
About authors
- 1 — Ufa State Oil Technical University, OAO Uralburmach
- 2 — Ufa State Oil Technical University, OAO Uralburmach
- 3 — Ufa State Oil Technical University, OAO Uralburmach
- 4 — Ufa State Oil Technical University, OAO Uralburmach
- 5 — Ufa State Oil Technical University, OAO Uralburmach
- 6 — Ufa State Oil Technical University, OAO Uralburmach
Abstract
Unprecedentedly difficult operating conditions of roller cone bit bearings, leading in many cases to their failure at the initial stage of operation, require not only a detailed study of operation and wear of individual elements of the bearings, but also further search for ways to improve them.
Область исследования:
(Archived) Without section
Funding:
None
Similar articles
Theoretical basis of an express method of explosive fracture assessment based on seismic signal parameters
2001 S. V. Lukichev
Model of the granulometric composition of the fractured mined rock at the edge
2001 M. G. Menzhulin, G. P. Paramonov, S. V. Khokhlov
Calculation of the main parameters of drilling and blasting operations in the explosion of selective detonating explosive charges
2001 ZH. G. Dambaev, A. V. Zditovetskii, V. N. Kovalevskii