Analytical model of pressure change on the wall of the charge cavity taking into account the flow of detonation products through the axial channel of the profiled face
About authors
- 1 — G.V. Plekhanov Saint Petersburg State Mining Institute
- 2 — G.V. Plekhanov Saint Petersburg State Mining Institute
- 3 — G.V. Plekhanov Saint Petersburg State Mining Institute
Abstract
In given work was considered an impulse’s formation process of extended charge explosive with installation a continuous and a special stemming in the hole. Was given the physical model to definite a size of the reflected wave impulse. Also was taken into account an increment radius of cross-section blast hole and expirations of detonation products. Was developed the model consists gas dynamic process in the hole during changing the central canal of the stemming.
Область исследования:
(Archived) Blasting, explosives and means of mechanization of their application
Funding:
None
Similar articles
Improvement of the technology of calculation of dangerous distances for rock pieces at mass explosions at quarries
2009 A. V. Zharovkin
Rock crushing and formation of explosive seismic waves during underground parallel excavations
2009 G. M. Kryukov, V. G. Vartanov
Installation of effective dust suppression at explosions and rock crushing
2009 I. V. Brigadin, A. G. Nesterov
Evaluation of efficiency of rock fracturing processes by explosion of elongated explosive charges based on the results of experiments on Plexiglas blocks
2009 G. M. Kryukov, V. V. Stadnik, Yu. V. Glazkov