The prediction technics of tunnel sets with complex three dimensional configuration stress state with allowance for relative influence and building sequence
About authors
- 1 — Ph.D., Dr.Sci. professor National Mineral Resources University (Mining University)
- 2 — Ph.D. assistant lecturer National Mineral Resources University (Mining University)
- 3 — post-graduate student National Mineral Resources University (Mining University)
Abstract
The three dimensional stress distribution in tunnel set with allowance for relative influence and building sequence is investigated. To complete the task the finite elements analysis was used. The values of stress concentration factor and conformities of stress distribution in the «lining – mass» system are estimated. The relative influence of each tunnel in tunnel set with allowance for building sequence is identified.
Область исследования:
(Archived) Geotechnology for development of solid mining fields
Keywords:
tunnel
tunnel set
stress
displacement
concentration factor
permanent lining
chamber
drift
cross slit
Funding:
None
References
- Bulichev N.S. Mechanics of underground constructions: Textbook. Moscow, 1994.
Similar articles
Algorithm and characterization program of downhole electrosteamgenerator for heat treatment on high viscosity oil recervoirs
2012 E .A. Zagrivnyi, V. O. Zyrin
Technological parameters of vertical shafts, which are sinking in the presence of oil and gas, are proved
2012 A. Yu. Prokopov, V. L. Sklepchuk
Method for determining the vertical and strain displacement using laser-scanning systems
2012 V. N. Gusev, M. G. Vystrchil