About directions of stabilization grain size metallurgical alumina
About authors
- 1 — Ph.D., Dr.Sci. professor National Mineral Resources University (Mining University)
- 2 — student National Mineral Resources University (Mining University)
- 3 — postgraduate student National Mineral Resources University (Mining University)
- 4 — postgraduate student National Mineral Resources University (Mining University)
Abstract
The materials physical and chemical analysis of the reasons of instability particle size distribution of productional of aluminum hydroxide in the processing of bauxite by Bayer process. Shown that the frequency of changes in the properties precipitate Al(OH)3, formed during the precipitation of aluminate solutions determined by the dependence of the growth processes on the relative supersaturation of the system per unit area of the seed. Found determines the influence of concentration injected seed aluminum hydroxide and its active surface (which varies under the influence of impurities in the aluminate solution) on the parameters of the periodic changes in the properties of sediment.
Область исследования:
(Archived) Without section
Funding:
None
References
- VasilyevaO.Yu. Management of nucleation using system of automatic analysis of the image «Videotest» // Nonferrous Metals. 2005. N 6. P.53-55.
- GarelJ. Oscillatory chemical reactions / D.Garel, O.Garel. Moscow, 1986. 148 p.
- KuznetsovI.A. Ways to obtain coarse of aluminum hydroxide in the Urals aluminum plant / I.A. Kuznetsov, V.S. Chernoskutov, M.A. Perestoronina et al. // Nonferrous Metals. 2007. N 1. P.57-62.
- LutzkyL.P. Problems of development of the integrated production of alumina at the Bogoslovskii aluminum plant / L.P.Lutzky, E.A.Ruban, O.Yu.Vasilieva // Nonferrous Metals. 2006. N 5. P.17-19.
- PrigogineI. Introduction to thermodynamics of irreversible processes. Moscow, 1960. 127 p.
Similar articles
Recovery of rhenium in hydrometallurgic processing osmium-containing process-suitable materials of sulphide-copper ores
2013 A. Ya. Boduen, G. V. Petrov, A. Yu. Spynu, Yu. V. Andreev, I. I. Mardar
Basic and strength of iron ore sinter
2013 N. Yu. Lugovskii, M. G. Yakovlev, O. V. Zyryanova, V. A. Utkov
Microalloying of aluminum as the method оf changing properties of powder oxidation film
2013 A. Yu. Baimakov, S. Yu. Petrovich, R. A. Seitenov, V. A. Lipin, A. L. Shakhmin
Extraction of cerium lanthanides by using stoichiometric concentration solution of naphtenic acid
2013 D. S. Lutskii, T. E. Litvinova, D. E. Chirkst, V. A. Lutskaya, S. V. Khruskin