About resistant steel 110G13L in different abrasive media
- 1 — Ph.D., Dr.Sci. professor National Mineral Resources University (Mining University)
- 2 — Ph.D. associate professor National Mineral Resources University (Mining University)
- 3 — post-graduate student National Mineral Resources University (Mining University)
- 4 — post-graduate student National Mineral Resources University (Mining University)
Abstract
Regularities abrasion steel 110G13L with a significant load on the sample and impact. Found that increasing the load to the point where the voltage on the surface of the sample achieved a true rupture stress of the material, does not increase the wear resistance of steel. Shown that the impact and, therefore, have no hardening significant influence on the wear rate of steel in its work on the solids (granite, gabbro). In the case of soft rocks (marble) concomitant impact effect is exceeds durability of the material. Designed conclusion on whether the elements are made of mining and processing equipment from steel 110G13L depending on the hardness of the destroyed rock.
References
- Baron L.I. Abrasion rocks at procuring / L.I. Baron, A.V. Kuznetsov. Moscow, 1961, 213 p.
- Baron L.I. Defining the properties of rocks / L.I. Baron, B.M. Loguntsov, E.Z. Posin. Moscow, 1962. 332 р.
- Bolobov V.I. Wear resistance of Hadfield steel at high specific loads / V.I. Bolobov, V.S. Bochkov, Syui Tsinyan. Mining Machinery and Electromechanics. 2012. N 1. P.38- 42.
- Gulyaev A.P. Metallography. Moscow, 1986. 544 p.
- Lakhtin Yu.M. Metallography and heat treatment of metals. Moscow, 1976. 407 p.
- Materials Science: Textbook for higher technical education. / B.N. Arzamasov, I.I. Sidorin, G.F. Kosolapov etc. Moscow, 1986. 384 p.
- Methods to improve the durability of machine parts / V.N. Tkachev, B.M. Fishteyn, V.D. Vlasenko, V.A. Ulanov. Moscow, 1971. 272 p.
- The expediency of making teeth excavator bucket of steel 110G13L / V.I. Bolobov, A.P. Batalov, Yu.V. Lykov, V.S. Bochkov. Development of mineral resources in the North: issues and solutions // Proceedings of the 10th International Scientific Conference. Vorkuta, 2012. Р.319-322.
- Solntsev Y.P. Metallography and metal technology. Moscow, 1988. 512 p.
- Tenenbaum M.M. Wear resistance and durability of mining machines. Moscow, 1960. 247 р.
- Khrushchev M.M. Patterns of abrasive wear. Moscow , 1975. 192 p.