Extraction of platinum metals during procssing of chromium ores from dunnite deposits
- 1 — Ph.D., Dr.Sci. professor Saint-Petersburg Mining University
- 2 — Ph.D., Dr.Sci. General director LLC «Research and Development Center «Gidrometallurgiya»
- 3 — Ph.D. associate professor Peter the Great St.Petersburg Polytechnic University
Abstract
Currently, the main raw materials sources of platinum group metals in Russia are complex sulfide copper-nickel ores of the Taimyr region and placer deposits. However, in view of the inevitable loss of platinum metals during the metallurgical processing of initial ores and the deterioration of the quality of ore raw materials, along with a decrease in the share of platinum mining from placers, there is a need to look for new non-traditional sources of platinum group metals. Dunnites of the Middle Urals are promising platinum-bearing raw materials. The use of the gravitational-magnetic processing of chromium ores of dunnite deposits makes it possible to identify a magnetic platinum-bearing concentrate with a high content of magnetite and platinum-iron alloys, they can be refined using chemical-metallurgical methods. This article presents the results of research of identifying peculiarities of technological behavior of chromium, iron and noble metals during mechanical processing of ledge chromium ore. The kinetic regularities of the sulfuric acid decomposition of magnetite are determined. Optimum technological parameters of sulfuric acid leaching of iron from magnetic products of chromium ore dressing are established. Based on the conducted studies, the PDF and PID for the complex processing of chromium ores of dunnite deposits is proposed, which ensures the production of a rich platinum-bearing concentrate and a high-quality chromite concentrate that meets the requirements of chemical production.
Funding
The research was performed within the framework of AGTP1.3.08 «Development of physical-chemical foundations of energy saving processes and technology during complex processing of non-ferrous metals» (2008-2012) and state budget program N18.44.24 «Technological foundations for production of alumina, rare metal products, carboaluminates and their derivatives of high quality in complex processing of low-quality ore and technogenic raw materials of non-ferrous metals» (2014-2016).