Severe problems accompany the production of abnormal oils with high pour point (with a paraffin content of over 30% by weight) in Kraynego Severa, Russia, due to the intensive formation of asphalt-resin-paraffin deposits (ARPD) in the bottom hole zone of the productive formation and downhole equipment. Possessing many advantages, the existing methods and technologies for coping with ARPD cannot fully solve this problem. As a result, complications arising from the production of high-wax oils lead to a significant decrease in oil production, a reduction in the production wells' maintenance and intertreatment periods, and an increase in dewaxing unit operating costs. The obtained results of theoretical and laboratory studies show that one of the promising approaches to improve the efficiency of wells equipped with electric submersible pumps when exploitation of abnormal oils with high pour point from multilayer deposits of the Timan-Pechora oil and gas province is the use of the new integrated technology based on the joint production of abnormal oil with high pour point with the oil, characterized by a lower wax content and the manifestation of structural and mechanical properties, in conjunction with regulating the parameters of the electric submersible pump. In this paper, the authors also describe a promising scheme of downhole equipment for the simultaneous-separate production of high-wax oil from multilayer deposits. The proposed downhole equipment allows us to separate the perforation zones of two productive formations using a packer-anchor system during simultaneous-separate exploitation of the formations by a double electric submersible pump installation.
