-
Date submitted2021-04-19
-
Date accepted2021-10-18
-
Date published2021-12-16
Mutual spectral densities calculation of the moments of resistance on the peat milling unit working bodies
- Authors:
- Konstantin V. Fomin
When performing technological operations in the peat industry, various units with milling-type working bodies are used. They differ in design, layout, number and type of cutting elements, operating modes, and may have one or more working bodies. During operation, random forces and moments act on the cutters, which have a dramatically variable nature, which is associated with the periodic interaction of the knives with the peat deposit, its structural heterogeneity, variations in the milling depth, physical and mechanical properties of peat, the rotational speed of the cutter and the movement speed of the machine. In this case, significant dynamic loads arise in the structural elements, which leads to a decrease in their reliability, deterioration of the energy characteristics of the engine operation and technical and economic indicators of use. In the dynamic analysis of drive elements, when using machines with several working bodies, it is necessary to know both spectral and mutual spectral load densities. For their calculation, expressions were obtained that take into account the physical and mechanical properties of peat, the operating modes of the unit and their probabilistic characteristics, as well as the design features of the working body. The expressions are obtained for the case when there are several working bodies with the same diameters and the number of knives in the cutting plane. In this case, the number of planes, width, type of cutting element and type of cutting (locked, semi-locked, etc.) may differ. As an example of using the developed approaches, the calculation of spectral and mutual spectral densities of moments on cutters and loads in the drive elements of the machine for surface-layer milling MTF-14 is presented.
-
Date submitted2017-10-27
-
Date accepted2018-01-01
-
Date published2018-04-24
Method of induction control of iron weight fraction in magnetite ore
- Authors:
- I. N. Bazhenov
- O. O. Basov
This paper analyzes the peculiarities of existing methods and means of induction control of magnetic susceptibility of the medium are analyzed. It is concluded that these means have a common drawback due to the low measurement accuracy caused by the wave-like dependence of the instrument sensitivity on the gap between the probe and the medium surface. The ways of increasing the instrument sensitivity and measurement accuracy of controlled parameters by means of inductive measuring transducers are revealed. A method for induction resonance control of iron weight fraction in magnetite ore has been developed, and its effectiveness has been estimated using simulation modeling. Practical recommendations for the development of quality control instruments for magnetite ores have been developed. A variant of the quality control unit layout for working with magnetite ores is proposed.