Submit an Article
Become a reviewer
Vol 138
Pages:
54-60
Download volume:
RUS
Research article
Without section

Statics and kinematics of vehicles with spiral-chain traction device on inclined track

Authors:
N. P. Boytsov
I. N. Boytsova
Date submitted:
1992-09-18
Date accepted:
1992-11-24
Date published:
1993-12-28

Abstract

The St. Petersburg Mining Institute has carried out a number of works in which a wide enough area of use of spiral-chain gearing in the drive of mining machines is defined, a methodology for calculating the main design parameters is developed, and also experimental data of laboratory and industrial tests of hoisting and transporting vehicles with a spiral-chain traction device (SCTD) are obtained, which have found application at mining enterprises of the Krasnoyarsk region. However, ensuring safer operating conditions of mining machines with SCTD requires additional studies of the influence of external factors on the process of converting the rotary motion of the working body into translational movement of the vehicle.

Go to volume 138

References

  1. А.с. 848465 СССР. МКИ^3 В 66 В 15/00. Подъемное устройство / Н.П. Бойцов (СССР). Опубл. 23.07.81. Бюл. № 27.
  2. А.с. 457642 СССР. МКИ^3 В 65 F 17/06. Пластинчатый конвейер / Н.П. Бойцов (СССР). Опубл. 25.01.75. Бюл. № 3.
  3. А.с. 603754 СССР. МКИ^3 Е 21 F 13/08. Бункерный конвейер / Н.П. Бойцов (СССР). Опубл. 25.04.78. Бюл. № 15.
  4. А.с. 542004 СССР. МКИ^3 Е 21 F 13/08. Конвейерный поезд / Н.П. Бойцов (СССР). Опубл. 05.01.77. Бюл. № 1.
  5. Бойцов Н.П., Зуева Л.Н. Особенности карьерного подъемного комплекса непрерывного действия // Изв. вузов. Горный журнал. 1982. № 11. С. 89-92.
  6. Бойцов Н.П., Зуева Л.Н. Метод определения оптимальных параметров подъемной установки на ЭВМ // Записки ЛГИ.1991. Т. 117. С. 77-84.
  7. Бойцов Н.П., Скаленский Е.К. Исследование роботы самоходного подъемника по статистическим данным стендовых испытаний // Изв. вузов. Горный журнал. 1982. № 4. С 66-69.
  8. Жуков Л.И. Волотковский С.А. Рудничный транспорт. Свердловск, 1956. 406 с.
  9. Солнышкин Н.П., Соколов Н.М. Качество и надежность самоцентрирующих патронов. Л.: Машиностроение, 1969. 127 с.

Similar articles

Calculation of parameters of wave processes at start-up of multi-drive belt conveyor
1993 M. M. Vetyukov, D. A. Jungmeister, V. A. Avdeev
Rational mechanical characteristic of the carriage feed drive of the AMS unit
1993 Yu. V. Lykov
Method of calculation of vector dimension chains
1993 A. P. Batalov
Determining the optimal match between the average and instantaneous loads of mining machines
1993 A. M. Meshkov
Improvement of gear hydraulic machines by meshing geometry
1993 S. L. Ivanov, I. P. Ivanov, O. A. Krasnozhon
Press for production of double-layer fuel coal briquettes
1993 Yu. D. Tarasov, V. V. Denegin, G. V. Sokolova, Yu. S. Fedorov, Yu. N. Marusov, N. K. Ulashchik