Existence area of spur gear meshing with a given overlap coefficient

S. L. Ivanov

Vol 138

Pages:

15-22

Download volume:

RUS

Research article

Without section

Existence area of spur gear meshing with a given overlap coefficient

Authors:

S. L. Ivanov

Date submitted:

1992-09-04

Date accepted:

1992-11-21

Date published:

1993-12-28

Abstract

Widespread use of gear hydraulic machines, and in particular hydraulic pumps, is explained by their high manufacturability and simplicity of design. However, the presence of the pinched volume of the pinion hydraulic machine, due to the realization of the zone of two-pair meshing at the overlap coefficient ε α >I, leads to a decrease in the volumetric efficiency of the hydraulic machine, as well as requires technological and design measures to unload the pinched volume, which ultimately affects the labor intensity of the manufacture of the hydraulic machine, reduces the resource of operation.

Иванов С.Л. Область существования зацепления цилиндрических зубчатых колес с заданным коэффициентом перекрытия // Записки Горного института. 1993. Т. 138 . С. 15-22.

Ivanov S.L. Existence area of spur gear meshing with a given overlap coefficient // Journal of Mining Institute. 1993. Vol. 138 . p. 15-22.

References

А.с. 1413274 СССР. МКИ F 04 С 2/08. Шестеренная гидромашина внешнего зацепления. И.П. Иванов, С.Л. Иванов (СССР). Опубл. 30.07.88. Бюп. № 28.
А.с. 1613686 СССР. МКИ F 04 С 2/08. Шестеренная гидромашина / И.П. Иванов, С.Л. Иванов, С.Г. Локшинский (СССР). Опубл. 15.12.90. Бюп. № 46.
Иванов И.П., Иванов С.Л. Оптимизация зубчатых зацеплений шестеренных насосов. М., 1987. Деп. в ВНИИТЭМР. 01.04.87. № 162.

Existence area of spur gear meshing with a given overlap coefficient

Abstract

References

Similar articles