Testing of pressed building products obtained from mining, metallurgical and energy production wastes
About authors
- 1 — Moscow Geological Prospecting University
- 2 — Moscow Geological Prospecting University
Abstract
As a result of researches it is established that according to ecological, economic and technological factors manufacturing of wall materials for low-rise building by a method of half-dry forming, based on a principle of "zone injection", is the most effective. Laboratory and semi-industrial tests of wall materials obtained from man-made formations according to the proposed technology are close to ceramic and silicate products in their physical and mechanical properties and are not inferior to pressed products manufactured on the equipment of US, Belgian and Italian firms.
Область исследования:
(Archived) Problems of technogenic formations and use of industrial and domestic waste
Similar articles
Development of the basis for the construction of acoustic-radar systems of remote sensing of the surrounding space for environmental monitoring tasks
2003 A. A. Kalmykov, V. I. Elfimov
Development of technology for manufacturing plywood and glue veneer from aspen wood
2003 V. I. Onegin, A. N. Chubinskii
Algorithms for calculating the radar characteristics of radioactive atmospheric emissions
2003 V. I. Veremev, S. P. Kalenichenko, A. A. Konovalov
Statistical model of anomalous natural phenomena in a dynamically unstable climatic system based on space observations
2003 V. A. Golovko, T. V. Kondranin