Submit an Article
Become a reviewer
Vol 155 Iss. 1
Pages:
7-10
Download volume:
RUS
Article
Geology

Optimization of open-pit mining of the Khoilinskoe barite deposit based on computer modeling

Authors:
I. V. Apukhtina
About authors
  • Research assistant G.V. Plekhanov Saint Petersburg State Mining Institute
Date submitted:
2002-06-01
Date accepted:
2002-07-03
Date published:
2003-12-08

Abstract

Volumetric model of the ore body of Khoilinskoe barite deposit was built using Micromine software, which was used as a basis for computer modeling of options for open-pit mining of the deposit. Taking into account the design parameters of the existing open pit (the height of the overburden 5 m, the height of the repayment berm 15 m, the slope of the repayment berm 50°) its volume model was built, on the basis of which the volumes of extracted rock mass, ore were estimated and the average stripping ratio was calculated (19.7). A similar model was built for the prospective variant of the open pit, for which, taking into account new data on physical and mechanical properties of rocks, it became possible to increase the slope of the pit walls to 60° and the height of the repayment benches to 30 m. Calculated by the new model overburden ratio was 14.7, which will reduce the total volume of overburden by 1493 thousand m3.

Область исследования:
Geology
Funding:

None

Go to volume 155

Similar articles

The influence of technology on the formation of the load during the construction of the column station of the St. Petersburg Metro "Komendantsky Prospekt"
2003 P. A. Demenkov
Equilibrium recrystallization of aluminum hydroxide
2003 A. V. Starshinov, A. V. Tsybizov
Experience of using predictive computer packages at enrichment plants
2003 E. V. Golovin, M. V. Lamtev
Geomechanical justification of methods and means to ensure the stability of preparatory workings in zones of high rock pressure in layered massifs
2003 D. I. Raevskii
Regression model of mechanical drilling speed of fractured rocks
2003 Mpezo Mavambo
Estimation of energy flow losses in the gearing
2003 E. A. Kremcheev