Research and analysis of roll hardening
About authors
- 1 — G.V. Plekhanov Saint Petersburg State Mining Institute
- 2 — G.V. Plekhanov Saint Petersburg State Mining Institute
Abstract
It was established experimentally that the greatest influence on the wear resistance and fatigue strength have the force and profile radius of the tool. The fatigue resistance of the samples at a rolling force of 600 N has increased by 2.5 times. Strengthening of flanges allowed increasing the number of load cycles from 21000 to 405100 (15-20 times).
Область исследования:
(Archived) Mining engineering technologies. Diagnostics and control of technical systems and their elements. New technologies
Similar articles
Electric drive of stabilization systems of technical means of shelf development
2004 N. M. Beznosenko, A. E. Kozyaruk
Bench tests of pneumatic perforators with a twin hammer
2004 V. A. Pivnev, Z. A. Sazhko, Yu. V. Sudenkov, D. A. Yungmeister, A. L. Kuripko
Determination of feed force on drilling tools depending on the direction of the wells
2004 K. P. Khmyznikov