Submit an Article
Become a reviewer
Vol 159 No 2
Pages:
96-98
Download volume:
RUS
Research article
Mining electromechanics

Optimization of the parameters of the linear section of a tubular belt conveyor

Authors:
Yu. S. Parkhomenko
About authors
  • Moscow Geological Prospecting University
Date submitted:
2003-07-17
Date accepted:
2003-08-09
Date published:
2004-12-27

Abstract

For more than 20 years, designers have been developing a tubular belt conveyor with significant advantages. Presented is the design of a tubular belt conveyor based on a belt conveyor designed by OAO "VNIIPTMASH". Loading of bulk cargo in the tubular belt conveyor is carried out at a speed close to the speed of the belt, which reduces dust formation. On the track, the belt is coiled into a pipe by support rollers. The belt with the load coiled into the pipe can bend both horizontally and vertically. At present, the problem of traction calculation of a tubular belt conveyor has not been solved, because the coefficient of resistance to movement of such a belt inside the roller support is not known. Determination of the coefficient of resistance to belt movement will allow to perform traction and strength calculations of the conveyor belt.

Go to volume 159

Similar articles

Automatic control system for the clinker burning process in a rotary kiln
2004 P. V. Volgin
Development of consumer lending at the regional level and at the level of financial centers of Russia
2004 O. A. Zaikina
Improving the quality of well casing in the oil fields of the Republic of Tatarstan
2004 T. R. Kateev
The possibility of using gelpora for explosive preparation of rock mass in the conditions of construction material production quarries
2004 S. Yu. Semenyak
Study of inorganic salt deposition processes and selection of inhibitors to combat this phenomenon
2004 V. A. Kapitonov
Technique for evaluating the tightness of hydraulic props of mechanized roof supports
2004 K. G. Buyalich