Submit an Article
Become a reviewer
Vol 159 No 2
Pages:
96-98
Download volume:
RUS
Research article
Mining electromechanics

Optimization of the parameters of the linear section of a tubular belt conveyor

Authors:
Yu. S. Parkhomenko
About authors
  • Moscow Geological Prospecting University
Date submitted:
2003-07-17
Date accepted:
2003-08-09
Date published:
2004-12-27

Abstract

For more than 20 years, designers have been developing a tubular belt conveyor with significant advantages. Presented is the design of a tubular belt conveyor based on a belt conveyor designed by OAO "VNIIPTMASH". Loading of bulk cargo in the tubular belt conveyor is carried out at a speed close to the speed of the belt, which reduces dust formation. On the track, the belt is coiled into a pipe by support rollers. The belt with the load coiled into the pipe can bend both horizontally and vertically. At present, the problem of traction calculation of a tubular belt conveyor has not been solved, because the coefficient of resistance to movement of such a belt inside the roller support is not known. Determination of the coefficient of resistance to belt movement will allow to perform traction and strength calculations of the conveyor belt.

Go to volume 159

Similar articles

Geodetic work for installation and alignment of large-size equipment
2004 Abdali Zhalal Akhmad
The problem of increasing the clearances in the bed frames of the working stands of rolling mills
2004 A. V. Kokovikhin
Technique for evaluating the tightness of hydraulic props of mechanized roof supports
2004 K. G. Buyalich
Formation of temporarily non-working side of the cut
2004 V. O. Vasilevskii
Influence of economic indicators on the efficiency of regulation of oil field development by horizontal wells
2004 D. P. Patrakov
Mathematical model of a multiple straight-through drawing mill
2004 S. A. Linkov