Submit an Article
Become a reviewer
Vol 165
Pages:
207-209
Download volume:
RUS
Article

High-pulse method of opening of refractory gold-containing products

Authors:
V. A. Chanturiya1
I. Zh. Bunin2
About authors
  • 1 — Mining and Metallurgical Experimental Research Center of the Polar Division of OAO MMC Norilsk Nickel
  • 2 — Mining and Metallurgical Experimental Research Center of the Polar Division of OAO MMC Norilsk Nickel
Date submitted:
2004-12-10
Date accepted:
2005-01-11
Date published:
2005-11-22

Abstract

In 2001-2002, the Talnakh Concentrator (Talnakh Concentrator) of the Polar Division of MMC Norilsk Nickel implemented a number of measures aimed at improving the ore concentration technology at the Talnakh and Oktyabrskoye deposits in order to improve the quality of nickel and copper concentrates. A side effect of the implementation was a significant reduction in the amount of pyrrhotite concentrate (PC) supplied for processing to the hydrometallurgical production (HMP) of the Nadezhda Metallurgical Plant (NMZ). In 2003, a method of improving the autoclave-oxidation technology for processing PC with high pyrrhotite content was introduced into industrial production, which provides for the involvement of intermediate products of ore enrichment at Talnakh Concentrator into the HMP of NMP. This allowed to increase the output of non-ferrous and precious metals from "off-balance" raw materials while optimizing the utilization of the existing capacities of the NMP; to increase the stability of the oxidative leaching process of high-sulfur coarse-dispersed PCs and to improve the technological performance of the Talnakh Concentrator and the NMP. The actual economic effect obtained during 5 months of the development utilization amounted to 176 mln rub.

Область исследования:
(Archived) Without section
Funding:

None

Go to volume 165

Similar articles

Processing of flotation copper-nickel concentrate of "Pechenganickel" Combine in Vanyukov's two-zone furnace
2005 S. V. Berkutov, M. V. Knyazev
Assessment of technogenic impact of hazardous objects of oil and gas complex on components of natural environment
2005 M. A. Pashkevich, T. A. Petrova
Results of mineralogical investigations of solid samples of initial and final products of atmospheric copper treatment in the technology of sulfuric acid leaching of high-copper feinstein
2005 A. V. Vydysh, M. N. Naftal, L. N. Ertseva, A. G. Morgacheskii
About the role of grinding medium in preparation of matte for flotation separation
2005 A. I. Rakaev, P. A. Shumilov, V. I. Maksimov, S. G. Besedovskii
Electrothermal processing of galvanic production waste
2005 B. A. Lavrov, Yu. P. Udalov, K. B. Kozlov
Improvement of copper concentrate roasting furnace design using physical modeling method
2005 P. S. Seregin, D. V. Rumyantsev, D. B. Maksimov