Submit an Article
Become a reviewer
Vol 165
Pages:
43-45
Download volume:
RUS
Article

Prospects of processing of technogenic raw materials (on the example of gold-slag wastes from TPPs of Irkutsk region)

Authors:
V. V. Vlasova1
N. I. Nikolskaya2
K. V. Fedotov3
About authors
  • 1 — Irkutsk State Technical University
  • 2 — Irkutsk State Technical University
  • 3 — Irkutsk State Technical University
Date submitted:
2004-12-19
Date accepted:
2005-01-08
Date published:
2005-11-22

Abstract

The development of the fuel and energy complex of the Irkutsk region has led to the accumulation of a huge amount of ash and slag waste, which can be considered as technogenic raw materials. The development of technology for their effective processing will allow not only to obtain an economic effect, but also to reduce environmental stress in the areas adjacent to thermal power plants. The paper presents the results of the study of physical, chemical and technological characteristics of TPP wastes of the Irkutsk region and possible technologies of their complex processing.

Область исследования:
(Archived) Without section
Funding:

None

Go to volume 165

Similar articles

Non-crystalline mineral fertilizers and their industrial production
2005 V. V. Napsikov, V. E. Kogan, K. G. Karapetyan
Carbonyl penonickel is a promising material for battery industry
2005 V. F. Kozyrev, yu. N. Lisakov
Activation of action of cationic reagent-assemblers
2005 S. N. Titkov
Features of chemical interactions occurring during atmospheric copper cleaning of nickel-cobalt solution in the technology of sulfuric acid leaching of high-copper matte
2005 A. V. Vydysh, M. N. Naftal, A. F. Petrov, I. V. Batsunova, A. G. Morachevskii
About one method of calculation of the stressed state of coal and roof at development of hollow coal seams
2005 A. P. Gospodarikov, S. V. Vasilev, M. A. Zatsepin, S. E. Mansurova
Investigation of crystallization patterns of high copper/nickel ratio matte with increased copper/nickel ratio
2005 I. G. Fokeeva, L. B. Tsymbulov, L. N. Ertseva