Substantiation of pumped volumes of flow angularity compositions in injection wells
About authors
- 1 — post-graduate student Saint Petersburg State Mining Institute (Technical University)
- 2 — Ph.D., Dr.Sci. professor Saint Petersburg State Mining Institute (Technical University)
- 3 — Ph.D. assistant Saint Petersburg State Mining Institute (Technical University)
Abstract
The method of calculation pumped volumes of flow angularity compositions in injection wells, which based on combination of the seepage theory, laboratory investigation and field experience is developed.
Область исследования:
(Archived) Development of oil and gas deposits
Keywords:
flow angularity compositions
filtration
residual flow resistance factor
bulk volume factor of injection
emulsion composition
Funding:
None
References
- Basniev K.S. Reservoir hydromechanics / K.S.Basniev, N.M.Dmitriev, R.D.Kanevskaya. M.-Izhevsk: Computer research institute, 2006. 488 p.
- Basniev K.S. Oil and gas mechanics / K.S. Basniev, N.M. Dmitriev, G.D. Rosenberg. M.-Izhevsk: Computer research institute, 2003. 480 p.
- Rogachev M.K. Prevention of troubles during oil recovery / M.K.Rogachev, K.S.Strizhnev Moscow: Nedra, 2006. 295 p.
- Strizhnev K.S. Well repair and isolation works: Theory and practice. Saint Petersburg:: Nedra, 2010. 560 p.
Similar articles
Engineering-geological substantiation of reshaping wave-built solid masses with partial removal of hydraulic mine dump
2011 I. V. Kuznetsova, V. P. Zharikov
The autoresonant asynchronous electric drive of dynamically counterbalanced drilling string on carrying cable with swinging movement fluctuations amplitude stabilization
2011 E. A. Zagrivnyi, V. V. Ivanik
Countouring of organogenic constructions in upper devonian period by the changing wave pattern
2011 A. A. Vazaeva
Software of automation of the decision of the linear notch and equalizing of network triangulation with measured lengths
2011 Shakhin Ali Fuad