Submit an Article
Become a reviewer
Vol 202
Pages:
242-245
Download volume:
RUS
Article

Modeling of the oxidation of sulfide ores with the aid of a cascade of continuous stirred-tank reactors

Authors:
Yu. V. Sharikov1
N. A. Karastelev2
About authors
  • 1 — Ph.D., Dr.Sci. professor National Mineral Resources University (Mining University)
  • 2 — undergraduate student National Mineral Resources University (Mining University)
Date submitted:
2012-09-13
Date accepted:
2012-11-18
Date published:
2013-04-29

Abstract

The method of recovery the refractory sulfide ores with the aid of pressure oxidation was examined. The basic processes of oxidation was discovered and the mathematical description of the process of sulfide oxidation in a heterogeneous system, the liquid – solid, was suggested. The ReactOp allowed to solve inverse problem – determination of kinetic parameters (E = 112 kJ/mol, ln(K) = 20 m/s) from the experimental data. On the basis of defined parameters is made and investigated the cascade of continuous stirred-tank reactors.

Область исследования:
(Archived) Without section
Keywords:
pressure oxidation of sulfide ores extraction of precious metals modeling the oxidation process a cascade of continuous stirred-tank reactors
Go to volume 202

References

  1. Sharikov U.V., Beloglazov I.N. Modeling of systems. Methods of numerical implementation of mathematical models // Saint Petersburg State Mining University. Saint Petersburg, 2012.
  2. Papangelakis V.G., Demopoulos G.P. On the attainment of stable autothermal operation in continuous pressure leaching reactors // Department of Chemical Engineering and Applied Chemistry, December 12, 1991.
  3. Papangelakis V.G., Demopoulos G.P. Acid pressure oxidation of pyrite: reaction kinetics // Department of Chemical Engineering and Applied Chemistry, December 3, 1990.
  4. Levenspiel O. Chemical reaction engineering // Department of Chemical Engineering Oregon State University. 1999.

Similar articles

Oxidative melting of sulfide melts with the formation of low-siliceous slags
2013 G. V. Konovalov, T. R. Kosovtseva
Determination of optimal parameters of sulphatising roasting of phosphorus ferromanganese
2013 N. M. Telyakov, A. A. Darin
Features of rich iron ores preparation for metallurgical processing
2013 V. B. Kuskov, Ya. V. Kuskova, A. V. Kornev
Microalloying of aluminum as the method оf changing properties of powder oxidation film
2013 A. Yu. Baimakov, S. Yu. Petrovich, R. A. Seitenov, V. A. Lipin, A. L. Shakhmin
Using of aluminum fluoride with high bulk density for alumina feeding systems of reduction pots
2013 A. N. Khrapkova, V. M. Sizyakov, V. Yu. Bazhin
Prospects of magnesium oxide application in Bayer’s aluminous technology
2013 V. M. Sizyakov, E. V. Tikhonova, M. A. Cherkasova