Submit an Article
Become a reviewer
Vol 202
Pages:
56-62
Download volume:
RUS
Article

Study of the separation process dispersed nonuniform systems for conditioning bauxite

Authors:
V. M. Sizyakov1
O. A. Dubovikov2
N. V. Nikolaeva3
About authors
  • 1 — Ph.D., Dr.Sci. professor National Mineral Resources University (Mining University)
  • 2 — Ph.D. associate professor National Mineral Resources University (Mining University)
  • 3 — Ph.D. assistant lecturer National Mineral Resources University (Mining University)
Date submitted:
2012-09-04
Date accepted:
2012-11-13
Date published:
2013-04-29

Abstract

The possibility of thickening and filtration for separation of heterogeneous disperse systems formed during the chemical conditioning of bauxite was investigated. It is shown that with increasing the ratio between liquid and solid phases of bauxite pulp thickening process indicators are improving. A similar influence provides of temperature increase of the process and the use of flocculants. The obtained results are compared with the indicators of condensation of red mud. The filter cloth was chosen for slurry concentrate bauxite, which provides the most rational regime filtration with the accumulation of sediment.

Область исследования:
(Archived) Without section
Keywords:
red mud bauxite concentrate thickening the rate of discharge the specific area of thickening filtration
Go to volume 202

References

  1. Zelikman A.N., Voldman G.M., BelyaevL.V. The theory of hydrometallurgical processes. Moscow, 1975. 504 p.
  2. Naboychenko S.S., Yun A.A. Calculations of hydrometallurgical processes. Moscow. 1995. 428 p.
  3. Naumchik A.N., Dubovik O.A. Production of alumina: Textbook. Leningrad, 1987. 99 p.
  4. Handbook of ore enrichment. Special and support processes / The editorship O.S.Bogdanov, V.I.Revnivtseva. Moscow, 1985. 376 p.
  5. Porter J.L. Interpretation of settling test data for esmnbgtion of area requirements for settling and consolidation of nuds / J.L.Porter, H.F.Scandrett // Extractive Metallurgy of Aluminium. 1963. Vol.1. P. 95-112.
  6. Talmage S.P. Determining of unit area thickeners / S.P.Talmage, E.B.Fitch // Industrial and Engineering Chemistry. 1955. Vol.47. N 1. 17 р.
  7. Fitch B. Current thecru and thiekener design. An autnoritativs eritigue of the establisned and recently pripcsed methods thiekener design // Industrial and Engineering Chemistry. 1966. Vol. 58. N 10. P. 18-28.

Similar articles

Thermodynamic analysis of aluminium hydroxide calcination at alumina production
2013 V. M. Sizyakov, L. A. Voropanova
Membership function of process parameters formation based on fuzzy clustering оf production data
2013 N. V. Vasileva, E. D. Kadyrov
Academician N.S.Kurnakov: his life and work
2013 D. E. Chirkst
Substantiation of the process of transition of noble metals in solution when dissolved copper-nickel anodes on the basis оf the diagrams Purbe
2013 A. N. Telyakov, D. V. Gorlenkov, S. A. Rubis, A. Yu. Boguslavskii
Microalloying of aluminum as the method оf changing properties of powder oxidation film
2013 A. Yu. Baimakov, S. Yu. Petrovich, R. A. Seitenov, V. A. Lipin, A. L. Shakhmin
Neuronet controller design for complex technological processes
2013 N. I. Koteleva, N. V. Vasileva