Submit an Article
Become a reviewer
Vol 214
Pages:
28-32
Download volume:
RUS

Nickel electrolyte purification from ferrum (III) and copper (II) impurities by extraction using a mixture of oleic acid and triethanolamine

Authors:
L. A. Voropanova1
N. T. Kisiev2
About authors
  • 1 — Ph.D., Dr.Sci. professor North Caucasian Institute Mining and Metallurgy Institute (State Technological University)
  • 2 — acting shop floor foreman of the calcination shop «MMK «Norilsk nickel»
Date submitted:
2014-10-15
Date accepted:
2014-12-23
Date published:
2015-08-25

Abstract

The conditions of the selective and joint extraction of copper and ferrum impurities from a nickel electrolyte by extraction using a mixture of oleic acid and trietanolamine in kerosene were determined: extraction Fe (III) at 3 < рН ≤ 4, 1 ≤ В:О ≤ 4 and t = 40 °C; extraction Cu (II) at 5 ≤ рН ≤ 6, 1 < В:О ≤ 4 and t = 40 °C; joint extraction of copper and ferrum at рН = 5-6, 1 ≤ В:О ≤ 4 and t = 40 °C. The process flow sheet of selective extraction of ferrum and copper from a nickel electrolyte by extraction using a mixture of oleic acid and triethanolamine in kerosene is given.

Keywords:
extraction oleic acid trietanolamine kerosene water solution copper ferrum cobalt nickel
Go to volume 214

References

  1. Автоклавная гидрометаллургия цветных металлов / С.С.Набойченко, Л.П.Ни, Я.М.Шнеерсон, Л.В.Чугаев. Екатеринбург: Изд-во УГТУ, 2002. 940 с.
  2. Борбот В.Ф. Новые процессы в металлургии никеля и кобальта / В.Ф.Борбот, И.Ю.Лещ. М.: Металлургия, 1976. 359 с.
  3. Вольдман Г.М. Теория гидрометаллургических процессов / Г.М.Вольдман, А.Н.Зеликман. М.: Металлургия, 1993. 400 с.
  4. Воропанова Л.А. Обезвреживание стоков, содержащих ионы цветных металлов, путем экстракции их смесью олеиновой кислоты и триэтаноламина // Цветная металлургия. 2001. № 5. С.32-38.
  5. Проблемы электролиза меди и никеля / Г.Н.Шиврин, Т.А.Головицкая, С.А.Илюшин, А.А.Колманов. Рязань: НП «Голос губернии», 2011. 352 с.
  6. Резник И.Д. Кобальт / И.Д.Резник, С.И.Соболь, В.М.Худяков. М.: Машиностроение, 1995. Ч.2. С.351-397.
  7. Худяков И.Ф. Металлургия меди, никеля, сопутствующих элементов и проектирование цехов / И.Ф.Худяков, С.Э.Кляйн, Н.Г.Агеев. М.: Металлургия, 1993. 432 с.
  8. Voropanova L.A. Extraction of copper (II), nickel (II), cobalt (II) chromium (III) and iron (II, III) ions from aqueous solutions with a technical lubricant / L.A.Voropanova, L.N.Velichko. Russian Journal of Applied Chemistry. 1999. Vol.72. № 11. P.1970-1975.

Similar articles

Method of controlling the temperature field on the basis of the Green's function
2015 Yu. V. Ilyushin, I. M. Pershin
Method of diagnostics of diesel engines in timing of the operating cycle
2015 A. S. Afanasev, A. A. Tretyakova
Improving the technology of open-cast mining using surface miners and spreaders
2015 A. Yu. Cheban
Modeling of geomechanical processes in ore mass using physically nonlinear model
2015 A. G. Protosenya
Productivity of ore and placer gold deposits of the priamur province
2015 V. A. Stepanov, A. V. Melnikov
Conservation of municipal solid waste landfills for landfill gas utilization
2015 M. A. Pashkevich, T. A. Petrova