Methodology for determining the parameters of drilling mode for directional straight sections of well using screw downhole motors
- 1 — Ph.D., Dr.Sci. rector Saint Petersburg Mining University ▪ Orcid ▪ Elibrary ▪ Scopus ▪ ResearcherID
- 2 — Saint Petersburg Mining University
Abstract
Article presents results of study on possibility of increasing the efficiency of drilling directional straight sections of wells using screw downhole motors (SDM) with a combined method of drilling with rotation of drilling string (DS). Goal is to ensure steady-state operation of SDM with simultaneous rotation of DS by reducing the amplitude of oscillations with adjusting the parameters of drilling mode on the basis of mathematical modeling for SDM – DS system. Results of experimental study on determination of extrema distribution of lateral and axial oscillations of SDM frame depending on geometrical parameters of gerotor mechanism and modes ensuring stable operation are presented. Approaches to development of a mathematical model and methodology are conceptually outlined that allow determining the range of self-oscillations for SDM – DS system and boundaries of rotational and translational wave perturbations for a heterogeneous rod with an installed SDM at drilling directional straight sections of well. This mathematical model of SDM – DS system's dynamics makes it possible to predict optimal parameters of directional drilling mode that ensure stable operation of borehole assembly.
References
- Dvoynikov M.V. Research on technical and technological parameters of inclined drilling. Zapiski Gornogo instituta. 2017. Vol. 223, p. 86-92. DOI: 10.18454/PMI.2017.1.86
- Dvoynikov M.V., Blinov P.A., Morozov V.A. Optimization of drilling parameters for stabilization sections of zenith angle. Izvestiya vysshikh uchebnykh zavedenii. Neft' i gaz. 2016. N 6, p. 65-71 (in Russian).
- Dvoynikov M.V. Designing of well trajectory for efficient drilling by rotary controlled systems. Zapiski Gornogo instituta. 2018. Vol. 231, p. 254-262. DOI: 10.25515/PMI.2018.3.254
- Dvoynikov M.V., Muraev Yu.D. Technical and technological solutions ensuring stable operation of a screw downhole mo-tor. Zapiski Gornogo instituta. 2016. Vol. 218, p 198-205 (in Russian).
- Dvoynikov M.V., Blinov P.A., Morozov V.A., Kunshin A.A. Study of dynamics for drilling string and screw downhole mo-tor. Vestnik assotsiatsii burovykh podryadchikov. 2016. N 2, p. 8-12 (in Russian).
- Morozov V.A., Dvoynikov M.V. Justification for selection of directional drilling mode parameters using screw downhole motors.Stroite'stvo neftyanykh i gazovykh skvazhin na sushe i na more. 2019. N2, p.15-18. DOI: 10.30713/0130-3872-2019-2-15-18 (in Russian).
- Morozov V.A., Dvoynikov M.V., Blinov P.A. Study of optimal range of stable operation for “drilling bit – screw downhole motor – drilling string” system.Neftegazovoe delo. 2018. Vol. 16. N 2, p. 35-43 (in Russian).
- Yunin E.K., Khegai V.K. Deep Drilling Dynamics. Moscow: OOO «Nedra-Biznestsentr», 2004, p. 286 (in Russian).
- Liu X.H.,Liu Y.H., Feng D.Downhole Propulsion/Steering Mechanism for Wellbore Trajectory Control in Directional Drilling.Applied Mechanics and Materials. 2013. Vol. 318,p. 185-190.
- Larsen Lena Kyrvestad. Tools and Techniques to Minimize Shock and Vibration to the Bottom Hole Assembly. University of Stavanger. 2014,p. 135. URL: www.brage.bibsys.no/xmlui/handle/11250/220906
- Leine R.I.,van Campen D.H., Keultjes W.J.G.Stick-slip whirl interaction in drillstring dynamics.ASME Journal of Vibra-tion and Acoustics. 2002. Vol. 124(2),p. 209-220.
- Li Z.,Guo B.Analysis of longitudinal vibration of drillstring in air and gas drilling. Rocky Mountain Oil and Gas Tech-nology Symposium. Denver. Colorado. SPE 107697-MS. Society of Petroleum Engineers. 2007. DOI: org/10.2128/107697-MS
- Samuel R.,Robertson J.E.Vibration Analysis and Control with Hole-Enlarging Tools. Annual Technical Conference and Exhibition. Florence. Italy. SPE 134512-MS. Society of Petroleum Engineers. 2010. DOI: org/10.2118/134512-MS
- Vromen Т.G.M. Control of stick-slip vibrations in drilling systems: PhD thesis. Eindhoven University of Technology. Eindhoven, 2015, p. 256.
- Zhu Xiaohua,Liping Tang, Qiming Yang.A literature review of approaches for stick-slip vibration suppression in oilwell drillstring.Advances in Mechanical Engineering. 2014. N 6. DOI: 10.1155/2014/967952