On the use of a synchronous motor as the main motor in the system of the motor-generator set with flywheel suitable to the mining hoist according to in the system of Ilgner-Leonard system for mine hoist electrification
Authors:
Abstract
The use of a motor-generator set with a flywheel (Ward-Leonard-Ilgner) as the main drive of a synchronous motor is dictated by the presence of a hydraulic coupling connecting the shaft of the main motor to the shaft on which the alternating voltage is located. The dynamo and the flywheel are mounted on the latter. This coupling replaces the automatic slip regulator of the flywheel, which operates at a constant speed of the synchronous main motor. This article describes the installation of the hydraulic coupling and the concept of its use in the Ward-Leonard-Ilgner system with a synchronous main motor.
Область исследования:
Power Engineering
Funding:
None
References
- Metropolitan-Vickers brochure: Hydraulic slip regulator equipment for flywheel motor-generator sets of Ward-Leonard winders, Metropolitan-Vickers brochure, (No. 747/8-1; 6.32). (in Russian)
Similar articles
Main mechanical characteristics of some iron ores of Krivoy Rog and the quartzites enclosing them.
1934 V. V. Chernyavskii
Geodetic and mine surveying work of the Berezovskii district "Uraltsvetmetzoloto" in 1931.
1934 V. K. Yuzefovich
Pyramidal crystals of tinstone with a prismatic habit from East Transbaikal
1934 I. Yu. Ikornikova, E. A. Sevrugina