Submit an Article
Become a reviewer
Vol 47 Iss. 1
Pages:
57-64
Download volume:
RUS
Article

Plastic lining materials for multi-rope friction sheaves

Authors:
V. A. Kabanov
Date submitted:
1961-07-24
Date accepted:
1961-09-22
Date published:
1962-08-24

Abstract

With the use of multi-rope hoisting systems with friction pulleys, there is a need for new materials suitable for lining the grooves of rope driving pulleys of hoisting machines. The most common lining materials – wood (oak) and rubber-fabric conveyor belt – have insufficient coefficient of adhesion with steel rope (respectively 0.17 and 0.25) with unsatisfactory service life (3‑5 months). The coefficient of adhesion of lining materials with steel wire rope should not be lower than 0.3 and should not decrease when the rope is wetted; allowable specific pressure on the lining should not be lower than 25 kg/cm²; service life of lining – at least 5 years; lining should not wear out the ropes and catch fire during prolonged slippage of ropes and should be elastic enough.

Область исследования:
(Archived) Manufacturing machinery and equipment
Funding:

None

Go to volume 47

References

  1. Andreev A. V. Physical Bases of Shear Force Transfer by Friction Contact. Izd-vo MGI, 1958.
  2. Belyy V. D., Ovsienko P. I. Investigation of friction properties of materials of lining of leading pulleys. Sbornik: Voprosy gornoy elektromekhaniki, vol. XI, iss. 3, Gosgortekhizdat, 1960.
  3. Zaitsev A. K. Fundamentals of the Doctrine of Friction, Wear and Lubrication of Machines, pt. II, Mashgiz, 1947.
  4. Manufacture and Installation of Multi-Rope Mine Hoists. (rotaprint) Izd. GNТК SM SSSR, 1960.
  5. Kabanov V. A., Faktorovich A. M. Ways of expanding the field of application of multichannel mine hoist with friction pulleys. Izv. vuzov. Gornyi zhurnal, 1960, No. 7.
  6. Konyaeva L. P. About frictional qualities of lining materials for friction pulleys of hoisting machines. Sbornik: Mnogokanatnyy podʺem v gornoy promyshlennosti, Gosgortekhizdat, 1960.
  7. Chudakov E. A. To the question about friction of bodies possessing high elasticity. Proc. of the Tr. konferentsii po treniyu i iznosu v mashinakh, vol. I, Izd-vo AN SSSR, 1939.
  8. Shabanov-Kushnarenko Yu. P. Application of Elastic Lining on Multi-Roll Pulleys of Friction. Sbornik: Mnogokanatnyy podʺem, Ugletekhizdat, 1958.
  9. Kawecki Z., Stachurski J. Przegl. gorniczy. 1955, No. 7-8.
  10. Hitchen. H. Colliery Engng., 1952, May.

Similar articles

Investigation of the main parameters of the vortex pump for hydraulic transportation
1962 E. P. Kapralov
Machine estimation of the limits of applicability of S. A. Chaplygin's theorem
1962 A. D. Shkolnikov
On the influence of accuracy of manufacture of links on the efficiency of screw coaxial mechanisms
1962 V. D. Zinevich
Experimental data in calculation schemes of calculation of a hydromonitor jet
1962 K. G. Asatur
On the calculation of impact energy transfer
1962 I. G. Shelkovnikov
Rational Range of Pneumatic Motors
1962 V. D. Zinevich, E. D. Ryabkov