Theory of fuming process
Abstract
In the process of fuming zinc, lead, tin and rare metals contained in molten slag are extracted into fumes. The process was first carried out in 1927 and has not changed significantly since then. There are currently about 10 fuming plants in operation around the world. All of them consist of a caissonized shaft furnace in which a suspension of coal dust in the air is blown through a layer of molten slag. The coal dust is the fuel by combustion of which the required temperature of the slag is maintained. As a rule, the excess air to coal dust ratio in the blast is about 0.7. Partial combustion of coal creates a reducing atmosphere in the furnace. By varying the air-to-coal ratio, the process is controlled, the amount of heat generated and the degree of slag reduction are varied.
None
References
- Vanyukov A. V. et al. About the ways of intensification of slagging process (fuming). Byull. TsNII TsM, No. 17, 1965.
- Varyan S. M., Grigoryan G. V. Influence of coal grinding coarseness on metal extraction in fuming process. Byull. TsNII TsM, No. 17, 1958.
- Donchenko P. A. Experience of operation of slag-combustion plant at UKLCC UKSTsK. Alma-Ata, 1961.
- Knorre G. F. Furnace processes. Gosenergoizdat, 1951.
- Kostelov V. V., Werner B. F., Baymakov A. Yu. Fuming-process in non-ferrous metallurgy. Tr. in-ta Gipronikel', iss. 9, 1961.
- Okunev A. I. Some questions of the theory of fuming of zinc-containing slags. Tsvetnye metally, 1956.
- Bell R. E., Turner G. T., Peters E. J. of Metals, No. 7, 1955.
- Kellog H. Engl. Min. j., No. 158, 1957.