Reversible method of ventilating on of long dead-end mine workings of large cross-section after blasting operations
Abstract
Ventilation of hydraulic and transportation tunnels is complicated by a large cross-section of underground excavations, their considerable length and a large volume of blasting operations. Due to low air velocities in such excavations, the most common forcing method of ventilation does not provide rapid removal of harmful gases after blasting. Exhaust ventilation is also ineffective, as a large volume of slow-moving air is formed in the face area. ...
Область исследования:
(Archived) Without section
Funding:
None
References
- Mostepanov Yu. V. Aerodynamic similarity of streams at studying the processes of ventilation of mine workings. Izv. vuzov, Gornyi zhurnal, No. 5, 1966.
- Mostepanov Yu. B., Yakovlev Yu. A. Improvement of the electrical method of concentration measurement on the hydromodel in the study of ventilation of mine workings. Tekhnologiya i ekonomika ugledobychi, No. 11-12, 1965.
- Mostepanov Yu. B., Kolbin A. A. I. Investigation of the processes of ventilation of dead-end mine workings of large cross-section. Proektirovanie i stroitel'stvo ugol'nykh predpriyatiy, 2/98, 1967.
- Mustel P. I. Determination of partial ventilation fan performance, Gornyi zhurnal, No. 7-8, 1946.
Similar articles
Reduction of dustiness of the mine atmosphere in the mines of the Far North by reversal of the ventilation stream.
1968 V. S. Veprov
Investigation of ways to increase the efficiency of direct-flow straight‑through cyclones
1968 Yu. V. Gul