ELECTRIC DRIVE SETTING TORQUE CALCULATION METHOD IN ELECTRIC DRIVE SHUT-OFF VALVE SYSTEM WITH RECTILINEA DISPLACEMENT OF THE VALVE CLOSURE
- 1 — Tula State University
- 2 — Tula State University
Abstract
A new method for calculating the setting torque magnitude of the electric drive in the electric drive shut-off system as the main elements ensuring the safety of oil pipelines and main gas pipelines is presented. The method allows to calculate a sufficient value of the torque of the drive adjustment with a minimum volume of input information about the system elements characteristics (electric drive, shut-off valve, control system) and to ensure that the actual torque is met when the system is completely stopped by the calculated torque specified by static methods. Clarification of the tuning parameters is carried out by means of experimental determination of environmental leaks with a step-by-step decrease in the torque within the regulation of the electric drive. The use of the technique at the design stage allows, during the operation of the systems, to reduce undesirable loads arising in the shut-off valves from the side of the electric drive, ensuring reliable operation of pipeline systems transporting mineral raw materials.
References
- Абрамович Б.Н. Проблемы обеспечения энергетической безопасности предприятий минерально-сырьевого комплекса / Б.Н. Абрамович, Ю.А. Сычев // Записки Горного института. 2016. Т. 217. С. 132-139.
- Васин С.А. Практический опыт обеспечения качества технических систем при взаимодействии производителей в общем потоке создания ценности конечного продукта / С.А.Васин, Е.В.Плахотникова // Управление качеством в нефтегазовом комплексе. 2017. № 1. С. 37-39.
- Гуревич Д.Ф. Расчет и конструирование трубопроводной арматуры. Л.: Машиностроение, 1969. 887 с.
- Максаров В.В. Моделирование и управление динамическими свойствами технологических систем / В.В.Максаров, П.В.Леонидов // Записки Горного института. 2014. Т. 209. С. 71-77.
- Максаров В.В. Теория и практика моделирования и управления в области прогнозирования динамических свойств технологических систем / В.В.Максаров, Ю.Ольт // Металлообработка. 2012. № 2 (68). С. 5-12.
- Плахотникова Е.В. Результаты исследования систем «электропривод – запорная арматура» с позиции технической эффективности и энергопотребления // Известия ТулГУ. Технические науки. Тула: Изд-во ТулГУ, 2016. Вып. 3. С. 230-237.
- СТ ЦКБА 002-2003 Арматура трубопроводная. Задвижки. Методика силового расчета. СПб: НПФ ЦКБА, 2003. 69 с.
- Шпаков О.Н. О расчетах нагрузок в электроприводной арматуре // Арматуростроение. 2005. № 5. С. 48-51.
- Antsev V.Y. Improvement in production process for pipelines manufacturing based on quality management method/ V.Y.Antsev, N.A.Vitchuk, V.V.Miroshnikov // Procedia Engineering. Ser. «International Conference on Industrial Engineering, ICIE 2017». St. Petersburg: Saint-Peterburg Polytechnic University, 2017. P. 950-957.
- Gorlenko O. Development of management methodology for engineering production quality / O.Gorlenko, V.Miroshnikov, N.Borbatc // IOP Conference Series: Materials Science and Engineering. International Conference on Mechanical Engineering, Automation and Control Systems 2015, MEACS 2015. 2016. P. 66-70. DOI: 10.1088/1757-899X/124/1/012012
- Dynamic synthesis of technological equipment for the manufacture of precision articles/ A.G. Ivakhnenko, V.V.Kuts, A.Yu.Altukhov, E.O.Ivakhnenko // Chemical and Petroleum Engineering. 2015. Vol. 51. № 7. P. 445-451. DOI: 10.1007/s10556-015-0066-4
- Maksarov V. Determining the load on support rollers the pipe conveyor belt / V.Maksarov, E.Zlotnikov, J.Olt // Annals of DAAAM and Proceedings of the International DAAAM Symposium. 2017. P.0209-0215. DOI: 10.2507/28th.daaam.proceedings.028
- Maksarov V.V. Dynamic Stabilization of Technological Systems for Processing Edge Cutting Through Local Metstability / V.V.Maksarov, J.Olt, M.Madissoo // USB Proceedings. IEEE International Symposium on Assembly and Manufacturing, 25th-27th May 2012, Tampere Hall. Tampere, Finland. P. 6-12.
- Plakhotnikova Elena V. Quality and Competitiveness Improvement of NPP Safety Systems // IEEE Conference on quality management, transport and information security, information technologies (IT&MQ&IS). Nalchik, Russia, 2016. P. 41-42. DOI: 10.1109/ITMQIS.2016.7751946
- Rudenko A.A. Increase of stability of functioning of a production system of machine-building enterprise/ A.A.Rudenko, D.V.Antipov, M.O.Iskoskov // IOP Conference Series: Materials Science and Engineering 6. Ser. «6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering». 2015. P. 012-071. DOI: 10.1088/1757-899X/91/1/012071
- Zhou K. A review of electrical load classification in smart grid environment/ K.Zhou, S.Yang, C.Shen // Renewable & Sustainable Energy Reviews. 2013. Vol. 24. P. 103-110.