Submit an Article
Become a reviewer
Vol 66 Iss. 1
Pages:
66-71
Download volume:
RUS
Article

On the application of core drilling in Antarctic conditions

Authors:
N. D. Mikhailova
Date submitted:
1972-07-27
Date accepted:
1972-09-03
Date published:
1973-01-01

Abstract

One of the first priorities in Antarctica is to study the ice covering the continent. This article provides some thoughts on the possibility of using transportable equipment requiring relatively low energy costs for core drilling in Antarctica. Mechanical destruction of ice is supposed to be carried out with a special design bit reinforced with pointed cutters made of hard alloy. The cuttings formed during ice destruction will be carried out from under the face of the bit by the flow of circulating agent, which can be air, kerosene or paraffinic diesel fuel.

Область исследования:
(Archived) Without section
Funding:

None

Go to volume 66

References

  1. Volkov S. A., Volkov A. S. Reference book on exploratory drilling. Moscow, Gosgeoltekhizdat, 1963 (in Russian)
  2. Kudryashov B. B. et al. Investigation of Exploration Drilling Technology Issues on Ice and Subglacial Rocks of Antarctica. Sb. referatov po zakonchennym v 1968 g. nauchno-issledovatel'skim rabotam. Izd. Leningr. Gorn. Instituta, 1970 (in Russian)
  3. Peschansky I. S. Ice science and ice engineering. L., Uchpedgiz, 1967 (in Russian)
  4. Practical Calculations in Drilling. Under general ed. V. S. Fedorov and V. G. Belikov. M., Nedra, 1966 (in Russian)
  5. Shamshev F. A. et al. Technology and Technique of Exploration Drilling. M., Nedra, 1966 (in Russian)

Similar articles

Peculiarities of drilling technology for steam-hydrothermal wells
1973 Yu. M. Parijsky
Regularities of advance bottom-hole freezing during drilling with cold- carrier circulation.
1973 B. B. Kudryashov
Improving the quality of sampling on the basis of drilling with freezing (applied to phosphorite deposits of Estonia and Leningrad region)
1973 I. S. Afanasev, D. I. Berseneva, V. K. Chistyakov
Grapho-analytical solution of the problem of determining the penetration rate in hard rock drilling
1973 S. N. Tarakanov
Composite surfactants for aerated drilling fluids
1973 A. M. Yakovlev, A. V. Golovkin
Evaluation of the feasibility of reinforcing drilling tools with synthetic superhard materials in standard bindermatrices
1973 L. K. Gorshkov, N. N. Sumaneev, G. A. Senkin