In the process of drilling-in productive horizons, several irreversible physical and chemical processes take place in the near-wellbore zone of the formation: stress state of the rocks changes, penetration of the filtrate and solid phase, as well as drilling mud into the reservoir, and swelling of clay particles of intergranular cementing material are observed. As a result, permeability of productive horizon is significantly reduced and, consequently, potential inflow of oil or gas from formation is excluded. An equally serious problem exists during well servicing and workover, when the use of irrational fluids of well killing causes negative consequences associated with deterioration of reservoir properties of formations in the wells being repaired. Article presents the results of the experiments on permeability of clayed porous samples after exposure to various compositions of liquids. In order to increase permeability of near-borehole zone of the formation and increase productivity of wells completed by drilling, and after well servicing and workover, a composition of the process fluid containing a 15 % aqueous solution of oxyethylene diphosphonic acid (OEDA) with addition of a surfactant is proposed.
During well construction, one of the most complicated types of accidents is the bit seizure as a result of which oil and gas companies incur significant losses due to the abandonment of a portion of the drill string in the well, cutting of an additional wellbore, and sometimes loss of the well. In the case of the elimination of seizure due to packing a positive result can be achieved by pumping portions of the process fluid into the seizure area. Destruction of the packer during the physicochemical effect of the process fluid, in general, allows for complete or partial softening of the packer, changing the pressure in the seizure area and significantly reducing the force required to release the stuck tool. The article presents the results of laboratory studies on the effect of various compositions of process fluids on the packer to eliminate the bit seizure. The effectiveness of the packer destruction was estimated by reducing the tangential stresses after the physicochemical effect of various compositions of process fluids for the same period. A 10% aqueous solution of hydroxyethylidene diphosphonic acid with an addition of 0.5% surfactant alpha olefin sodium sulfonate is recommended as a process fluid to eliminate packer seizures.