The sensor is designed for continuous measurement with increased accuracy and subsequent registration of small linear velocities and accelerations of the combine harvester movements. The device is built into the housing of a typical sensor UPDS.

Collector - the main functional unit of a cluster of degassing wells - belongs to the category of control objects, in which the energy process is carried out in the form of heat and mass transfer. Structurally, the collector is made in the form of a section of the gas pipeline, in which the mixing of gas flows coming through the well trunklines takes place.

In the regions of the Far North the surface method of pipeline laying is becoming more and more widespread, which has a number of advantages in comparison with pipe-laying in perennially frozen soils. To protect pipelines from freezing, cold water pipelines are laid in common insulation with one or more pipelines that transport hot water ...

Calculation and adjustment of regulators, as well as the choice of optimal modes of operation of thermal engineering objects (mine calorifiers, boilers, boiler rooms, boiler houses, heat and water supply systems of mines, settlements and cities) are determined by the value of the atmospheric air temperature ...

The main disturbing influence on mine calorifiers and other heat objects (boilers, boiler rooms, water pipes, etc.) in the systems of automatic temperature control is the value of the increment of the outside air temperature for some constant interval of observation. ...

To control inertial objects two- and three-position methods of regulation are widely used, but the quality of regulation in this case remains low.

Let there is a non-random signal (or a specific realization of a random signal) y = y(t).Suppose this function is differentiable...

For synthesis and analysis of the structure of multi-cycle circuits, the algebra of events and states, or generalized Boolean algebra including time, is of considerable interest. Let us synthesize with its help the control scheme of branched conveyor lines. The conditions, which the synthesized circuit must satisfy, are determined from the analysis of serially produced circuits.