Submit an Article
Become a reviewer
P. S. Seregin
P. S. Seregin
OAO Gipronickel Institute
OAO Gipronickel Institute
St. Petersburg
Russia

Articles

Without section
  • Date submitted
    2004-12-11
  • Date accepted
    2005-01-26
  • Date published
    2005-07-01

Methods of Nickel Powder Production

Article preview

The existing solid-phase methods of nickel powder production are described, their critical analysis is carried out and ways of improvement are indicated, allowing to obtain a significant economic effect. The results of tests of low ash solid reducing agent allowing to reduce slag output at anode electro-smelting are given. The method of nickel cinder reduction in tube furnaces is stated, which allows to obtain an active fraction of nickel powder with cementation activity over 80%, which opens up the possibility of its use for purification of nickel electrolyte from copper.

How to cite: Seregin P.S., Besedovskii S.G. Methods of Nickel Powder Production // Journal of Mining Institute. 2005. Vol. 165. p. 154-156.
Without section
  • Date submitted
    2004-12-05
  • Date accepted
    2005-01-30
  • Date published
    2005-07-01

Distribution of zinc in semi-products of Kola Mining and Metallurgical Company

Article preview

The results of the study of zinc behavior during nickel production from high-grade matte are presented. Zinc is one of the most unfavorable impurities for refining nickel production, as its removal from the scheme is extremely difficult. The distribution of zinc in semi-products of production is studied, the sources of input are found and the natural ways of withdrawal of the impurity are indicated. In addition, additional ways to remove zinc from the Kola Company's technological scheme were proposed.

How to cite: Seregin P.S., Korotkova O.V., Dvorkin B.A., Zhilinchkin S.I. Distribution of zinc in semi-products of Kola Mining and Metallurgical Company // Journal of Mining Institute. 2005. Vol. 165. p. 157-159.
Without section
  • Date submitted
    2004-12-23
  • Date accepted
    2005-01-11
  • Date published
    2005-07-01

Improvement of copper concentrate roasting furnace design using physical modeling method

Article preview

The data on physical modeling of fluidized bed furnaces for roasting of copper concentrate from matte separation are presented. On the basis of observance of similarity criteria, a physical model of fluidized bed furnace is constructed to study the properties of fluidized bed and the influence of various factors on its properties. The influence of introducing a fluidizing agent into the blowing box on the non-uniformity of fluidization of the material in the furnace has been studied.

How to cite: Seregin P.S., Rumyantsev D.V., Maksimov D.B. Improvement of copper concentrate roasting furnace design using physical modeling method // Journal of Mining Institute. 2005. Vol. 165. p. 160-162.