-
Date submitted2023-03-14
-
Date accepted2023-06-20
-
Date published2023-07-19
The wireless charging system for mining electric locomotives
The electric vehicles development has a high potential for energy saving: an energy-saving traffic control can reduce energy resource consumption, and integration with the power grid provides the ability of daily load pattern adjustment. These features are also relevant for underground mining. The critical element of vehicle-to-grid integration is the charging infrastructure, where wireless charging is promising to develop. The implementation of such systems in underground mining is associated with energy efficiency issues and explosion safety. The article discusses the development and research of a wireless charging system for mining electric locomotive A-5.5-600-U5. The analytic hierarchy process is used for justification of the circuitry and design solution by a comparison of different technical solutions based on energy efficiency and safety criteria. A complex computer model of the wireless charging system has been developed that gives the transients in the electrical circuit of a wireless charging system and the high-frequency field density distribution near the transmitting and receiving coils in a 3D setting. An approach to ignition risk evaluation based on the analysis of high-frequency field density in the charging area between the coils of the wireless charging system is proposed. The approach using a complex computer model is applied to the developed system. The study showed that the wireless charging system for mining electric locomotives operating in the gaseous-and-dusty mine is technically feasible and there are designs in which it is explosion safe.
-
Date submitted2015-08-18
-
Date accepted2015-10-06
-
Date published2016-04-22
Energy- efficient control of asynchronous motor drive with current refinement of the loss minimum on the basis of fuzzy logic
- Authors:
- O. B. Shonin
- V. S. Pronko
Currently, asynchronous electric drive on the basis of semiconductor frequency converters is widespread because of the relative simplicity and reliability of the design, the use of digital control systems, providing the accuracy and flexibility of process control, which allows for a significant increase in product quality, reduction in energy consumption and improvement of the enterprise profitability. In spite of these advantages, the problem of ensuring high energy efficiency of the drive in wide range of its operational modes is still not solved in full scale. The paper is devoted to the reduction of losses in the asynchronous drive on the basis of en-ergy-saving control algorithms that aim to ensure the desired mode of the driven mechanism while minimizing losses in copper and steel of the motor. On the basis of the motor model, taking into account magnetic losses, dependences of losses in the copper and steel, as well as the total loss from the absolute slip have been derived for different operating points of the drive. The optimal values of the absolute slip for different speeds of the rotor have been obtained for use in the con-trollers ensuring operation of the drive at maximum efficiency, highest power factor and minimum of the stator current. For minimizing the losses in the drive when changing the motor parameters it has been offered the combined method based on the method of loss model and iterative method of searching the minimum of power consumption. The effectiveness of the proposed control system using fuzzy logic is confirmed by comparing the graphs of losses and efficiency, obtained at using a traditional control law and the optimal control law.
-
Date submitted2009-10-28
-
Date accepted2009-12-25
-
Date published2010-09-22
Prediction of dynamic manifestations of rock pressure in the all over automated longwalls
- Authors:
- M. Roiter
- V. Kurfyurst
- K. Mairkhofer
- J. Veksler
The support control system «MARCO» has programs for the estimation of a geomechanical situation around the face by continuous measurements of pressure in the legs of support. The analysis of the face convergence allows to predict the possibility of a rock burst. The seam’s reaction on the shearer or plough influence may be the dangerous main roof collapse into the mine-out space of longwall.
-
Date submitted2009-08-23
-
Date accepted2009-10-17
-
Date published2010-02-01
Reseach of cutoff grade influence on economic performances of mining
- Authors:
- M. D. Morozov
Research of cutoff grade influence on economic performances of mine as well as parameters and configuration of ore deposits with the help of the advanced geoinformation system were carried out. Computer modeling of an ore chute was made; the results of calculation were presented, involvement is given.
-
Date submitted2009-08-07
-
Date accepted2009-10-09
-
Date published2010-02-01
Predictive calculations for grinding flowsheets
- Authors:
- A. O. Romashev
The optimizing and predicting computer packages are extremely important in the theory and practice of processes of crushing, allowing to solve variety of the problems, concerning calculation of schemes, a choice of the equipment, definition of power expenses, automation etc.
-
Date submitted2009-07-28
-
Date accepted2009-09-14
-
Date published2010-04-22
The use of computer technologies аt the stages of prospecting, mining and conservation of mineral deposits
- Authors:
- K. V. Morozov
- S. V. Lukichev
The article described the methods for the use of specialized application of software on the stages of exploration, design, planning and maintenance of mining operations and also in abandonment or conservation of mineral resources deposits.