Submit an Article
Become a reviewer
Vol 155 Iss. 2
Pages:
101-103
Download volume:
RUS
Article

Starting characteristics of the conveyor drive in longitudinal compensation networks

Authors:
Yu. L. Zhukovskii
About authors
  • G.V. Plekhanov Saint Petersburg Mining University
Date submitted:
2002-07-20
Date accepted:
2002-08-24
Date published:
2003-12-30

Abstract

Mathematical model of induction motor with installation of longitudinal capacitive compensation is considered. Starting modes of asynchronous motor without load and with significant load on the shaft, without installation of longitudinal capacitive compensation and with longitudinal compensation are investigated. Starting modes of asynchronous motor in soft and rigid network are analyzed, improvement of starting conditions with considerable loading on a shaft of a powerful remote asynchronous motor in the scheme with the installation of longitudinal capacitive compensation (reduction of acceleration time, increase of voltage on the motor terminals, disappearance of negative values of moment) is shown. Conditions of occurrence of electromagnetic instability of start mode, permissible parameters of longitudinal compensation and shunt resistance are defined, at which occurrence of instability is excluded, the boundary of stable operation of investigated motor in start mode is set.

Область исследования:
(Archived) Mining electromechanics
Go to volume 155

Similar articles

Study of gravity-flotation technology for gold extraction from sulfide ores
2003 S. I. Melnikova
Determination of rational parameters of drainage excavations in the emission hazardous zones of potassium formations
2003 E. R. Kovalskii
Engineering and geological surveys for reclamation of lands disturbed during field development (by the example of the SOBR)
2003 G. B. Pospekhov
The use of secondary mineral resources in non-ferrous metallurgy is an important reserve of resource saving
2003 E. N. Guseva
Increasing the efficiency of tax regulation in the sphere of subsoil use
2003 S. A. Filatov
Improvement of coal saw drives and prospects for their application under Kuzbass conditions
2003 V. N. Kolosov