Submit an Article
Become a reviewer
Vol 159 No 1
Pages:
203-206
Download volume:
RUS

Determination of optimal parameters of the limiting state zones of coal in the development of flat coal seams

Authors:
A. P. Gospodarikov1
S. V. Vasilev2
L. A. Bespalov3
About authors
  • 1 — Professor G.V. Plekhanov Saint Petersburg State Mining Institute
  • 2 — Associate Professor G.V. Plekhanov Saint Petersburg State Mining Institute
  • 3 — Research assistant G.V. Plekhanov Saint Petersburg State Mining Institute
Date submitted:
2003-06-18
Date accepted:
2003-07-08
Date published:
2004-12-21

Abstract

The influence of various factors on the condition of the edge zone of the coal seam ahead of the face during the development of flat seams is assessed. All the variety of factors can be divided into mining-geological and mining-technical. Of mining-geological factors, the greatest influence on the coal deformation in the peripheral zone have such factors as power, depth of development, dip angle, presence of interlayers, of mining-technical - face length, speed of its movement, development system, type and power characteristics of the support, method of rock pressure control.

Go to volume 159

References

  1. Ардашев К.А. Показатели сопротивления, разрыхления и механизма разрушения горных пород в условиях объемного сжатия / К.А.Ардашев, Б.В.Матвеев, М.Д.Ильинов // Физико-технические проблемы разработки месторождений полезных ископаемых. 1984. № 2.
  2. Васильев С.В. Определение напряжений и деформаций в краевой зоне угольного пласта / С.В.Васильев, В.И.Кимков // Физические процессы горного производства / Ленинградский горный ин-т. Л., 1982. Вып.10.

Similar articles

Justification of investments in quarry construction to replenish the raw material base of OAO Karelsky Okatysh
2004 A. S. Semenov
Improvement of deep borehole construction technology by drilling and blasting
2004 E. P. Reznikov
Heavy metal distribution trends in the Neva Bay of the Gulf of Finland
2004 Ya. G. Panteleeva
Photo-planimetric survey of mine workings
2004 N. M. Voluevich
Assessing the influence of the converter load on current and voltage curve distortions
2004 Yu. A. Sychev
Ways to recycle and dispose of toxic industrial waste
2004 E. V. Eldina