Determination of optimal parameters of the limiting state zones of coal in the development of flat coal seams
About authors
- 1 — Professor G.V. Plekhanov Saint Petersburg State Mining Institute
- 2 — Associate Professor G.V. Plekhanov Saint Petersburg State Mining Institute
- 3 — Research assistant G.V. Plekhanov Saint Petersburg State Mining Institute
Abstract
The influence of various factors on the condition of the edge zone of the coal seam ahead of the face during the development of flat seams is assessed. All the variety of factors can be divided into mining-geological and mining-technical. Of mining-geological factors, the greatest influence on the coal deformation in the peripheral zone have such factors as power, depth of development, dip angle, presence of interlayers, of mining-technical - face length, speed of its movement, development system, type and power characteristics of the support, method of rock pressure control.
Область исследования:
(Archived) Humanities and fundamental researches
Funding:
None
Similar articles
Economic feasibility study of the "Kovykta - China - South Korea" natural gas export investment project
2004 D. A. Ilinskii
Reduction of energy consumption for pumping water by mine dewatering plants during parallel operation of pumps with frequency-controlled drive
2004 A. V. Lisitskii
Results of quantitative analysis of the synergy of environmental factors in their combined effects
2004 E. G. Nesterenko, O. S. Ivanova
Engineering-geoecological analysis of the conditions of construction and operation of the Beregovaya compressor station (Blue Stream gas pipeline, Gelendzhik region)
2004 P. V. Kotyukov