Processes of oxidation of impurities of metal concentrate of radio-electronic scrap
Authors:
About authors
- G.V. Plekhanov Saint Petersburg Mining Institute
Abstract
The study was carried out in order to find technological conditions that allow anodic dissolution of metal concentrate of radio-electronic scrap without difficulties caused by anode passivation. The thermodynamic probability of sufficiently complete oxidation of impurities included in the metal concentrate was established. The composition of refining slag allowing to bind oxidized impurities in slag is selected. Time dependence of oxidation of impurities by air due to application of radial-axial tuyere is shown. It is indicated that for 15min of blowing it is possible to prepare the metal-concentrate alloy for successful anodic dissolution in sulfuric acid electrolyte.
Область исследования:
(Archived) Without section
Funding:
None
Similar articles
Expansion of assortment of output products at complex processing of nepheline on the basis of use of calcium hydrocarbon aluminates
2006 E. V. Sizyakova
Improvement of melting technology of nickel and copper sludge cakes in metallurgical shop of copper plant of MMC Norilsk Nickel
2006 D. A. Pavlyuk
Application of center-run extractors in petrochemistry
2006 L. V. Grigoreva, A. V. Smirnov, G. S. Roshchin, N. M. Telyakov
Results of testing of technology of processing of radio-electronic scrap
2006 A. N. Telyakov, L. V. Ikonin