Model of technology of limestone roasting in a shaft kiln
About authors
- 1 — G.V. Plekhanov Saint Petersburg Mining Institute
- 2 — Санкт-Петербургский государственный горный институт (технический университет)
- 3 — Санкт-Петербургский государственный горный институт (технический университет)
Abstract
The mathematical description of the technology of firing of lump limestone raw materials in a shaft kiln equipped with burner devices providing preliminary gas combustion is given. The model takes into account the peculiarities of the process of dissociation of carbonate component of raw materials, uses equations describing the kinetics of the drying process, conditions of counter-flow of gases and material, regularities of distribution of material and gas flows along the cross-section and height of the shaft. The developed model represents a stationary two-dimensional solution of the problem.
Область исследования:
(Archived) Without section
Funding:
None
Similar articles
Studies of Mining Institute in the field of titanium and refractory compounds production
2006 S. V. Aleksandrovskii
Improvement of melting technology of nickel and copper sludge cakes in metallurgical shop of copper plant of MMC Norilsk Nickel
2006 D. A. Pavlyuk
Method of dissolution of copper-nickel anodes containing noble metals
2006 D. V. Gorlenkov, P. A. Pecherskii, S. A. Rubis, N. M. Telyakov
Conditions of blast feeding into melts and development of means of intensification of blast mode
2006 L. M. Shalygin, G. V. Konovalov, T. R. Kosovtseva