Preparation of zirconium-containing materials on the basis of eudialyte concentrate
Authors:
About authors
- 1 — G.V. Plekhanov Saint Petersburg Mining Institute
- 2 — G.V. Plekhanov Saint Petersburg Mining Institute
- 3 — G.V. Plekhanov Saint Petersburg Mining Institute
- 4 — G.V. Plekhanov Saint Petersburg Mining Institute
- 5 — G.V. Plekhanov Saint Petersburg Mining Institute
- 6 — G.V. Plekhanov Saint Petersburg Mining Institute
Abstract
The technology of obtaining zirconium oxide, zirconium halide compounds (chlorides, fluorides) from eudialyte concentrate with subsequent production of zirconium powders, titanium-zirconium and aluminum-zirconium ligatures by metal-thermal method has been investigated. It is shown that different zirconium materials can be obtained by applying different reducing agents: sodium, magnesium or aluminum-magnesium alloys.
Область исследования:
(Archived) Without section
Funding:
None
Similar articles
Ways to Improve the Quality of Technical Tellurium
2006 A. M. Belenkii, G. V. Petrov, A. Ya. Boduen, E. A. Brylevskaya
Conditions of blast feeding into melts and development of means of intensification of blast mode
2006 L. M. Shalygin, G. V. Konovalov, T. R. Kosovtseva
Extraction of cerium(III) and yttrium(III) by naphthenic acid from chloride media
2006 D. E. Chirkst, T. E. Litvinova, V. S. Starshinova, D. S. Lutskii
Application of center-run extractors in petrochemistry
2006 L. V. Grigoreva, A. V. Smirnov, G. S. Roshchin, N. M. Telyakov