Effect of cooling rate on the solidification behavior of ac AlSi7Cu2 alloy
About authors
- 1 — Silesian University of Technology
- 2 — Silesian University of Technology
- 3 — Light Metals Casting Technology Group
Abstract
This paper describes the effect of cooling rate on grain size, SDAS and thermal characterization results of cast AC AlSi7Cu2 alloy. The solidification process was studied from the cooling curve and crystallization curve at solidification rates from 0.16 to 0.71°C∙s-1. It was found that the nucleation temperature of aluminum dendrites and the proportion of solid at the coherence point of dendrites increased with increasing solidification rate, indicating an increase in mass feeding. In addition, it was observed that the non-equilibrium solidus temperature and grain size of the constituent grains of the SDAS decreased with increasing solidification rate.
Область исследования:
Metallurgy
Funding:
None
Similar articles
Technical and technological support of well wiring according to the set profile at Shershnevskaya area
2007 S. E. Chernyshov
Possibilities of application of rigs using kellystang technologies for drilling pits and large diameter wells for geological exploration
2007 V. L. Grabchak