Submit an Article
Become a reviewer
Vol 209
Pages:
78-82
Download volume:
RUS
Article

Evaluation of gas parameters in explosive type displacement pumps

Authors:
A. B. Nezametdinov1
M. G. Menzhulin2
S. V. Khokhlov3
P. V. Shishkin4
About authors
  • 1 — Ph.D. associate professor National Mineral Resources University (Mining University)
  • 2 — Ph.D., Dr.Sci. professor National Mineral Resources University (Mining University)
  • 3 — Ph.D. associate professor National Mineral Resources University (Mining University)
  • 4 — Ph.D. associate professor National Mineral Resources University (Mining University)
Date submitted:
2013-09-22
Date accepted:
2013-11-30
Date published:
2014-07-18

Abstract

Gas explosion and detonated waves parameters were determined for an ideal gas in an enclosed volume with rigid walls in gas systems on the border between explosive gases and liquids for different boundary conditions. Examples of the explosion of the combustible mixture of methane and air, with full and partial oxidation of methane have been considered.

Область исследования:
(Archived) Manufacturing machinery and equipment
Keywords:
displacement pump chamber pressure methane explosion oxygen concentration
Go to volume 209

References

  1. Avakian G.A. Calculation of energy and explosive characteristics of explosives, Moscow, 1964. 106p.
  2. Autor′s certificate of the USSR N 1281760. Hydraulic Pump / A.B. Nezametdinov, N.P. Boitsov. Publ. 1987. Bul. N 1.
  3. Borovikov V.A., Vanyagin J.F., Menzhulin M.G., Tsirel S.V. Compression waves in flooded cracked array . Leningrad, 1989 . 85 p.
  4. Lavrov N.V. Physical-chemical basis of the combustion of fuel, Moscow, 1976. P.272.
  5. Orlenko L.P. Calculation parameters of detonation waves in gas systems // Explosion physics. Vol.1. Moscow, 2002. P.88-93.

Similar articles

Modeling simulation of structure in a heat-affected zone of welded joint from low-alloyed steels
2014 E. I. Pryakhin, D. M. Sharapova
Modern technologies for processing and briquetting of metal shavings in automated factories
2014 E. G. Zlotnikov, V. V. Maksarov
Remote monitoringof pipelines usingtelecommunications technology
2014 I. A. Potapov, A. V. Kondratiev
Planning of the specialized elemens of the technological rigging in the mode of integration
2014 L. G. Borisova, A. E. Efimov
Method of operative analysis of the technical condition of the car
2014 A. V. Terentiev, B. D. Prudovskiy
Thermochemical processing technology development of austenitic corrosion-resistant chromium-nickel steels for internal housiong elements to improve their hydrogen resistance
2014 A. P. Petkova, O. Y. Ganzulenko