Submit an Article
Become a reviewer
Vol 235
Pages:
24
Download volume:
RUS ENG
Oil and gas

JUSTIFICATION OF THE TECHNOLOGICAL PARAMETERS CHOICE FOR WELL DRILLING BY ROTARY STEERABLE SYSTEMS

Authors:
Vladimir S. Litvinenko1
M. V. Dvoinikov2
About authors
Date submitted:
2018-09-07
Date accepted:
2018-11-10
Date published:
2019-02-25

Abstract

Paper presents the analysis of the investigation results of vibrational accelerations and beating amplitudes of the downhole drilling motor, which help to define the ranges of optimum energy characteristics of the gerotor mechanism, ensuring its stable operation. Dependencies describing the operation of the «drilling bit – rotary steerable system with power screw section – drilling string» system and the values of the self-oscillation boundaries and the onset of system resonance when it is used jointly, were defined as a result of computational and full-scale experimental research. A mathematical model is proposed, which allows determining the optimal range of technological parameters for well drilling, reducing the extreme vibration accelerations of the bottomhole assembly by controlling the torque-power and frequency characteristics of the drilling string, taking into account the energy characteristics of the power screw section of the rotary steerable system. Recommendations on the choice of drilling mode parameters were given.

10.31897/pmi.2019.1.24
Go to volume 235

References

  1. Dvoinikov M.V. Well trajectory design for efficient drilling with rotary-driven systems. Zapiski Gornogo instituta. 2018. Vol. 231, p. 254-262. DOI: 10.25515/PMI.2018.3.254 (in Russian).
  2. Dvoinikov M.V. Analysis of the studies' results of technical and technological parameters of inclined wells drilling . Zapiski Gornogo instituta. 2017. Vol. 223, p. 86-92. DOI: 10.18454/PMI.2017.1.86 (in Russian).
  3. Dvoinikov M.V., Muraev Yu.D. Technical and technological solutions to ensure the stable operation of a downhole motor. Zapiski Gornogo instituta. 2016. Vol. 218, p. 198-205 (in Russian).
  4. Zakirov A.Ya. The first test results of rotary-controlled systems produced in Russia. PROneft'. Professional'no o nefti. 2016. N 2, p. 42-48 (in Russian).
  5. Morozov V.A., Dvoinikov M.V., Blinov P.A. Investigation of the stable operation optimal range of the «drill bit-screw down-hole motor-drilling string» system. Neftegazovoe delo. 2018. Vol. 16. N 2, p. 35-43 (in Russian).
  6. Tikhonov V.S., Safronov A.I., Valiullin Kh.R. et al. Development of universal software for modeling the dynamics of a pipe string. SPE 171280-RU. 2014.
  7. Yunin E.K., Khegai V.K. Deep drilling dynamics. Moscow: OOO «Nedra-Biznestsentr», 2004, p. 152-175 (in Russian).
  8. Farah Omar F. Direction well desing, trajectory and survey calculations, with a case study in fiale, asal rift, Djibouti. United Nations University. Reykjavik, Iceland, 2013, p. 627-623.
  9. Larsen Lena Kyrvestad. Tools and Techniques to Minimize Shock and Vibration to the Bottom Hole Assembly. Bernt Sigve Adnoy. University of Stavanger. 2014, p. 135. https://brage.bibsys.no/xmlui/handle/11250/220906
  10. Leine R.I., Van Campen D.H., Keultjes W.J.G. Stick-slip whirl interaction in drillstring dynamics. ASME Journal of Vibration and Acoustics. 2002. Vol. 124(2), p. 209-220.
  11. Li Z., Guo B. Analysis of longitudinal vibration of drillstring in air and gas drilling. Rocky Mountain Oil and Gas Technology Symposium. Denver. Colorado. SPE 107697-MS. Society of Petroleum Engineers. 2007. DOI: org/10.2128/107697-MS
  12. Liu X.H., Liu Y.H., Feng D. Downhole Propulsion/Steering Mechanism for Wellbore Trajectory Control in Directional Drill-ing. Applied Mechanics and Materials. 2013. Vol. 318, p. 185-190.
  13. Samuel R., Robertson J.E. Vibration Analysis and Control with Hole-Enlarging Tools. Annual Technical Conference and Ex-hibition. Florence. Italy. SPE 134512-MS. Society of Petroleum Engineers. 2010. DOI: org/10.2118/134512-MS
  14. Vromen G.M. Control of stick-slip vibrations in drilling systems: PhD thesis. Eindhoven University of Technology. Eindho-ven, 2015, p. 256.
  15. Zhu Xiaohua, Liping Tang, Qiming Yang. A literature review of approaches for stick-slip vibration suppression in oilwell drillstring. Advances in Mechanical Engineering. 2014. N 6.
Access statistics
Abstract Views
1394
Full-Text Views
344
Cited
Scopus:
22
Crossref:
6
Cited By
1. Effectiveness of the method for selecting rotary-steerable systems based on the machine learning algorithm Random Forest Classifier. Bulletin of the Tomsk Polytechnic University, Geo Assets Engineering. 2024, Vol. 335, P. 185-199. DOI: 10.18799/24131830/2024/4/4129 [Scopus]
2. Hydrodynamic Model of Stationary Drilling Fluid Flow in a Cylindrical Pipeline. Lecture Notes in Civil Engineering. 2024, Vol. 372, P. 85-91. DOI: 10.1007/978-3-031-36723-6_9 [Scopus]
3. A complex model of a drilling rig rotor with adjustable electric drive. Journal of Mining Institute. 24 July 2023, Vol. 261, P. 339-348. DOI: 10.31897/PMI.2023.20 [Scopus]
4. EVALUATION OF ELASTIC-STRENGTH PROPERTIES OF CEMENT-EPOXY SYSTEMS. Bulletin of the Tomsk Polytechnic University, Geo Assets Engineering. 2023, Vol. 334, P. 97-105. DOI: 10.18799/24131830/2023/1/3925 [Scopus] (cited: 2)
5. Application of drilling machines with impact cam mechanism in various mining and geological conditions. Sustainable Development of Mountain Territories. 2022, Vol. 14, P. 501-511. DOI: 10.21177/1998-4502-2022-14-3-501-511 [Scopus] (cited: 7)
6. Impact of unstable drilling on energy efficiency of drill rotor drive. Mining Informational and Analytical Bulletin. 2022, P. 148-161. DOI: 10.25018/0236_1493_2022_1_0_148 [Scopus] (cited: 4)
7. Influence of impact duration on fracture efficiency in rocks and on plastic deformation of metals. Mining Informational and Analytical Bulletin. 2022, Vol. 2022, P. 78-96. DOI: 10.25018/0236_1493_2022_3_0_78 [Scopus] (cited: 13)
8. Method for selecting and substantiating the parameters of machines for water jet grouting of unstable seasonally frozen soil masses. Transportation Research Procedia. 2021, Vol. 57, P. 518-529. DOI: 10.1016/j.trpro.2021.09.080 [Scopus] (cited: 1)
9. Prospects of applying MWD technology for quality management of drilling and blasting operations at mining enterprises. Minerals. October 2020, Vol. 10, P. 1-17. DOI: 10.3390/min10100925 [Scopus] (cited: 25)
10. Influence of polymer reagents in the drilling fluids on the efficiency of deviated and horizontal wells drilling. Energies. September 2020, Vol. 13, DOI: 10.3390/en13184704 [Scopus] (cited: 23)
11. Study of the well near-bottomhole zone permeability during treatment by process fluids. Journal of Mining Institute. 26 April 2020, Vol. 242, P. 169-173. DOI: 10.31897/PMI.2020.2.169 [Scopus] (cited: 21)
12. Method of drilling process control and experimental studies of resistance forces during bits drilling with PDC cutters. Journal of Mining Institute. 2020, Vol. 245, P. 539-546. DOI: 10.31897/PMI.2020.5.5 [Scopus] (cited: 2)
13. Development of the drilling mud composition for directional wellbore drilling considering rheological parameters of the fluid. Journal of Mining Institute. 2020, Vol. 244, P. 454-461. DOI: 10.31897/PMI.2020.4.8 [Scopus] (cited: 11)
14. Development of spacer fluids and cement slurries compositions for lining of wells at high temperatures. Journal of Mining Institute. 2020, Vol. 242, P. 174-178. DOI: 10.31897/PMI.2020.2.174 [Scopus] (cited: 9)
15. Development of mathematical models to control the technological properties of cement slurries. Journal of Mining Institute. 2020, Vol. 242, P. 179-190. DOI: 10.31897/PMI.2020.2.179 [Scopus] (cited: 7)
16. Monitoring and control of the drilling string and bottomhole motor work dynamics. Topical Issues of Rational Use of Natural Resources 2019. 2020, Vol. 2, P. 804-809. DOI: 10.1201/9781003014638-42 [Scopus] (cited: 5)
17. The new type of strainer construction. Topical Issues of Rational Use of Natural Resources 2019. 2020, Vol. 2, P. 925-929. DOI: 10.1201/9781003014638-59 [Scopus] (cited: 1)
18. Well controlling using fiber-optic gyroscopes in the rotary steerable system design. Topical Issues of Rational Use of Natural Resources 2019. 2020, Vol. 1, P. 423-426. DOI: 10.1201/9781003014577-53 [Scopus]
19. Method of calculating the wear and PDC bit operating time. Topical Issues of Rational Use of Natural Resources 2019. 2020, Vol. 2, P. 791-795. DOI: 10.1201/9781003014638-40 [Scopus]
20. Development of a drilling process control technique based on a comprehensive analysis of the criteria. Journal of Mining Institute. 2019, Vol. 240, P. 701-710. DOI: 10.31897/PMI.2019.6.701 [Scopus] (cited: 8)
21. Ensuring stability of undermining inclined drainage holes during intensive development of multiple gas-bearing coal layers. Journal of Mining Institute. 2019, Vol. 239, P. 497-501. DOI: 10.31897/PMI.2019.5.497 [Scopus] (cited: 15)
22. Stimulation of the drilling process with the top driven screw downhole motor. Journal of Mining Institute. 2019, Vol. 238, P. 438-442. DOI: 10.31897/PMI.2019.4.438 [Scopus] (cited: 9)
Article Menu
JUSTIFICATION OF THE TECHNOLOGICAL PARAMETERS CHOICE FOR WELL DRILLING BY ROTARY STEERABLE SYSTEMS

Similar articles

METROLOGICAL SUPPORT OF MONITORING SYSTEMS BASED ON UNMANNED AERIAL VEHICLES
2019 E. A. Kremcheev, A. S. Danilov, Yu. D. Smirnov
SPECIAL STRATEGY OF TREATMENT OF DIFFICULTY-PROFILE CONICAL SCREW SURFACES OF SINGLE-SCREW COMPRESSORS WORKING BODIES
2019 A. S. Vasilev, A. A. Goncharov
LIGNIN SLUDGE APPLICATION FOR FOREST LAND RECLAMATION: FEASIBILITY ASSESSMENT
2019 M. A. Pashkevich, T. A. Petrova, E. Rudzisha
DEVELOPMENT OF AN OCCUPATIONAL SAFETY MANAGEMENT SYSTEM BASED ON THE PROCESS APPROACH
2019 V. A. Filimonov, L. N. Gorina
CREATION OF TEMPERATURE INHOMOGENITIES WITH THE USE OF PELTIER ELEMENT FOR THE MASS-EXCHANGE PROCESSES INTENSIFICATION OF THE OIL AND GAS INDUSTRY
2019 Yu. L. Yunusova, V. G. Afanasenko
TOURMALINE AS AN INDICATOR OF TIN OCCURRENCES ОF CASSITERITE-QUARTZ AND CASSITERITE-SILICATE FORMATIONS (A CASE STUDY OF THE VERKHNEURMIYSKY ORE CLUSTER, FAR EAST)
2019 V. I. Alekseev, Yu. B. Marin