Submit an Article
Become a reviewer
Vol 233
Pages:
480-486
Download volume:
RUS ENG
Article

Method for forecast of surface deformation during excavation operations in restraint urban conditions using the slurry trench technique

Authors:
P. A. Demenkov1
L. A. Goldobina2
O. V. Trushko3
About authors
  • 1 — Ph.D., Dr.Sci. professor Saint-Petersburg Mining University
  • 2 — Ph.D., Dr.Sci. professor Saint-Petersburg Mining University
  • 3 — Ph.D. associate professor Saint-Petersburg Mining University
Date submitted:
2018-05-14
Date accepted:
2018-07-01
Date published:
2018-10-24

Abstract

The article suggests the method for forecast of surface deformation during excavation operations in restraint urban conditions using the slurry trench technique based on FEM simulation. The results of numerical simulation of the construction of a semi-underground structure with slurry trench technique are given. The regularities of the change in the stress-strain state are determined depending on the trench parameters and the physical-mechanical properties of the soils. The work presents the troughs of surface subsidence during the construction of an excavation using the slurry trench technique, the diagrams of bending moments, transverse and longitudinal forces arising in the trench. Numerical experiments in Plaxis 2D and 3D were performed to estimate the discrepancy between modeling results in a plane and volumetric formulation of the problem.

Область исследования:
Mining
Keywords:
foundation subsidence slurry trench soils semi-underground structures finite element method
10.31897/pmi.2018.5.480
Go to volume 233

Funding

The research was carried out with the framework of the grant of the Russian Science Foundation (project N16-17-00117)

Similar articles

Obtaining intermetallic compounds in Al–Ti–Zn system
2018 V. V. Kaminskii, S. Y. Petrovich, V. A. Lipin
Scientific and methodical approaches to increase prospecting efficiency of the russian arctic shelf state geological mapping
2018 A. S. Egorov, I. Yu. Vinokurov, A. N. Telegin
Increasing the wear resistance of adapters and drill pipes by elec-tromechanical processing
2018 S. K. Fedorov, L. V. Fedorova, Yu. S. Ivanova, M. V. Voronina, A. V. Sadovnikov, V. N. Nikitin
Calculations of dynamic operating modes of electric drives self-propelled mining machines
2018 E. K. Eshchin
Analysis of possible enhancementof properties of VK15 material used for drilling tools
2018 Yu. A. Kurganova, K. S. Panina, P. S. Beshenkov
Regularities of material destruction of the impactor in repeated single punch
2018 V. I. Bolobov, Le Tkhan' Bin