Reversible method of ventilating on of long dead-end mine workings of large cross-section after blasting operations
Abstract
Ventilation of hydraulic and transportation tunnels is complicated by a large cross-section of underground excavations, their considerable length and a large volume of blasting operations. Due to low air velocities in such excavations, the most common forcing method of ventilation does not provide rapid removal of harmful gases after blasting. Exhaust ventilation is also ineffective, as a large volume of slow-moving air is formed in the face area. ...
Область исследования:
(Archived) Without section
Funding:
None
References
- Mostepanov Yu. V. Aerodynamic similarity of streams at studying the processes of ventilation of mine workings. Izv. vuzov, Gornyi zhurnal, No. 5, 1966.
- Mostepanov Yu. B., Yakovlev Yu. A. Improvement of the electrical method of concentration measurement on the hydromodel in the study of ventilation of mine workings. Tekhnologiya i ekonomika ugledobychi, No. 11-12, 1965.
- Mostepanov Yu. B., Kolbin A. A. I. Investigation of the processes of ventilation of dead-end mine workings of large cross-section. Proektirovanie i stroitel'stvo ugol'nykh predpriyatiy, 2/98, 1967.
- Mustel P. I. Determination of partial ventilation fan performance, Gornyi zhurnal, No. 7-8, 1946.
Similar articles
Theoretical and experimental bases of forecasting the thermal regime of mines of the North
1968 Yu. D. Dyadkin, Yu. A. Budyonny
Influence of mining and technical factors on the occurrence of endogenous fires in coal mines of Primorskugol Combine
1968 Yu. V. Grigoriev